Why is my orbit timer not working?
Check the connection to the docking port to ensure the timer is plugged in properly. Try removing the timer and reinserting it into the docking port, pushing down until you hear a click. If you are still not getting power, the timer may be defective.
How do I reset my orbit hose timer?
Push the reset button located between the dial and the manual button. This will reset the entire timer and should refresh the display.
Why is my Orbit sprinkler not rotating?
Orbit rotating sprinkler heads are driven by water pressure, and if the pressure is too low, the sprinkler won’t rotate. It’s pretty easy to tell if you have low pressure in the zone because all the sprinkler heads will exhibit the same behavior, and if they do, you can probably trace the problem to the zone valve.
Why wont my sprinklers turn on?
When the sprinkler zones do not turn on at all, it is generally a problem with the electrical signals running from the controller to the valve solenoids. More rarely, it is caused by a faulty valve that needs to be rebuilt or replaced.
How do you fix an over tightened Orbitkey?
Most likely the shaft + screw mechanism has been overtightened. This can happen when there is no wave washer in with the keys, or the screw has been over-rotated into the system. We recommend twisting one side of the band anticlockwise for ONE full rotation while holding the other side of the band stationary.
What does smart watering do?
Smart Watering is an automated watering schedule that uses information about environmental conditions to ensure your plants get the optimum amount of water. Evaporation will draw moisture from your garden, while rainfall and irrigation will add moisture.
How does orbit rain sensor work?
It easily installs on any automatic irrigation system, then shuts sprinklers off in a storm and keeps them off, automatically compensating for the amount of rainfall that occurred.
Why is my sprinkler system not working?
If your sprinkler system is not getting water, a number of things could be the culprit: The backflow may be off. If the handle on your backflow valve gets inadvertently shut off, it restricts any water from flowing past the backflow and to the sprinkler system valves. Your rain sensor might be faulty.