What does 3 function diverter mean?
The three-way diverter allows you to alternate between any of your selected shower outputs by directing the water from the shower head to each additional accessory, one at a time. The diverter will not adjust the water temperature or turn the water off or on. All rough-in work should be completed by a professional.
What does a shower arm diverter do?
Two-way diverter switches the flow of water from a stationary shower head to a handheld shower.
What is the difference between a 3 setting and 6 setting diverter?
Shower Diverter Valve and Trim Kit Summary If you choose a Shower Control with Integrated 6-setting Diverter you can have a shower system with 3 peripheral spray outlet groups. If you choose a Shower Control with Integrated 3-setting Diverter, you can have a shower system with 2 peripheral spray outlet groups.
How does a 6 function shower diverter work?
The 6 setting allow you to control each spray individually, or any combination of 2 spray groups at the same time. The body sprays will be plumbed on a pressure loop and function together as a unit. The tub spout does not connect to the diverter in any way.
Is a shower valve the same as a diverter?
While diverter valves and shower valves look similar to one another, they provide very different functions and are not interchangeable. The main difference between a diverter valve and a shower valve is that one turns the water on/off while the other directs the flow of water between fixtures.
Is a diverter the same as a valve?
The main difference between a diverter and a transfer valve is how they direct the water supply. Diverters switch the flow of water between a tub and shower—either the showerhead or the tub faucet gets the water flow. Transfer valve sends water to multiple outlets at the same time.
How do you remove a Kohler shower diverter?
Unthread the knob from the end of the diverter button. Using a flat-blade screwdriver, hold the diverter stem in place while unthreading the diverter button. Unthread and remove the diverter button. Unthread and remove the diverter sleeve.
How does a push button shower diverter work?
It’s designed to divert water up into the showerhead instead of pouring out of the tub spout. Typically, you’ll adjust the faucet to your preferred water temperature before you activate the diverter to send water to the showerhead or bathtub.
The answer will determine which Shower Control Diverter you need. Remember, if you want a shower system with 3 peripheral spray outlets you will need a 6-setting diverter. If you want a shower system with 2 peripheral spray outlets you will need a 3-setting diverter.
How do you fix a shower tub diverter?
Repairing the Shower Diverter
- Shut off the supply of water to your shower.
- Seal your drain with tape so that small screws or other vital parts are not lost down the drainpipe.
- Tighten the screws behind the faceplate of the diverter valve.
- Disassemble the shower diverter.
- Change the diverter.
How do you replace a diverter valve?
Diverter Valve on a Spigot
- Unscrew the set screw. See how the spigot is attached to the wall.
- Unscrew spigot from the wall. Be careful!
- Wash Supply Pipe. Make sure that you clean off any bits of gunk from the supply pipe.
- Replace new spout on the copper pipe.
- Test it and make sure it works!