What is the red wire on a bathroom fan?
Use the red wire in the 3-conductor cable to put the light and fan on different switches. Connect the hot wire from the fan to the black wire from the switch and the hot wire from the light to the red wire from the switch. The hot wires in the unit may be colored differently.
How many wires are needed for a bathroom fan?
Wiring Considerations Most bathroom ventilation fans use a 15-amp circuit breaker and 14-gauge wiring. Due to the increased power drawn, fans with heaters usually require a 20-amp circuit breaker and 12-gauge wiring. Use the manufacturer’s electrical specifications to confirm this.
Where does the red wire go on bathroom exhaust fan?
Can you connect red and black wires together?
These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.
How do I test my bathroom exhaust fan?
A simple way to test your fan’s suction is to take a single square of toilet paper and place it along the fan vent while the fan is running. If the fan holds up the toilet paper, then the fan is working properly.
Is there a fuse in a bathroom extractor fan?
The box you are describing does not contain a fuse. It’s called a fan isolator. These are put in so that the fan can be switched off without having to turn the entire lighting circuit off. Inside there is a permanent live, used for the timer function, a switched live connected to the light and a neutral.
Why does my bathroom fan have 2 green wires?
In fixtures and devices Green insulation is used on wires as the designated color to indicate that it is a ground wire. When installing a light fixture you need to connect the Green wire(s) of the fixture to the ground wires in the box.