How do I reset my ink cartridge after refilling?

Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer.

Table of Contents

How do I reset the ink on my HP printer?

Press the “On” button on your printer to turn it on, wait 20 seconds, then turn it off. Allow the printer to completely turn off. Repeat this step five times so that the HP cartridge identification information will be erased from the printer’s memory.

Why is my printer not working after replacing ink cartridges?

Press the Power button to turn on the printer,if it is not already turned on.

Locate the two slots on the left and right sides of the printer.

Slide your fingers into the two slots,and then lift up to open the cartridge access door.

How to reset ink cartridge after refill?

Install cartridge and start print job.

After first message appears,click ‘OK’ to continue. Printer should start printing.

If second message appears and printer’s LCD screen displays error code “E”,then DO NOT click ‘CANCEL PRINTING’.

How do we reset the ink chip on ink cartridges?

While the printer is turned on,remove all ink supplies from the printer.

Unplug the printer from the power source while on and no ink supplies in the printer

Get a clean,lint free cloth and clean water

How to reset cartridge Ink and not waste printer ink?

Turn ON the printer.

Press and Hold the “Reset button” on the printer.

While pressing the “Reset button“,press and hold the “Color Start” button.

Wait for 5 seconds.

Release the “Color Start” button,and then release the “Reset Button“.

Wait until the printer starts to configure itself.

The no.