What is a exterior transponder?
External Transponders: External transponders are attached to a vehicle’s front license plate frame. These transponders are used on vehicles that have metal oxide windshields that prevent sticker and standard transponders from being detected. These transponders are also used commonly with commercial and fleet vehicles.
How do I get more Velcro for E-ZPass?
Need new adhesive strips? They’re FREE! Request them at www.e-zpassny.com or call 1-800-333-TOLL (8655).
How do you remove an E-ZPass transponder from a windshield?
Turn the tag right side up facing you. Place the tag in the correct position and press firmly against the glass for 15 seconds to achieve a good bond. Your E-ZPass tag may be removed by gently lifting one corner of the tag to separate the adhesive strips.
What is an exterior toll tag?
An externally mounted (or exterior) toll tag is designed to be screw-mounted on the front bumper where the license plate is located. It is installed using special tools and tamper-resistant screws to prevent loss or theft. View more information. Specific vehicle models may require an externally mounted toll tag.
Can you use Command Strips for E-ZPass?
You take one Command Strip in the package, and click it onto another one of the Command Strips in the package. Cut it to size of the transponder’s backside.. With them clicked together this way, you have adhesive on each side of the pairing.
Where do I mount my EZ Pass NY?
Your external tag is designed to be attached to the front of your vehicle, on a flat surface. It is screw-mounted in the area on the front bumper where the license plate is located. Position the tag so that the mounting holes correspond to the top of the license plate area on the front bumper of the vehicle.
How do you install an outside toll tag?
Your exterior toll tag is designed to be attached to the front of your vehicle, on a flat surface. You screw-mount an exterior toll tag on the front bumper either above or below where the license plate is usually located.
How do I add another car to my pa E-ZPass?
To add a rental vehicle, access your account online or via our mobile app, PA Toll Pay. When adding the vehicle to your account, indicate the vehicle is a rental. Enter the start and end dates when prompted. You can also call the PA Turnpike E-ZPass Customer Service Center at 1-877-736-6727.
How do I get my E-ZPass to stick to my windshield?
Turn over the piece of Sticker Shield that you cut so the protective paper side is now down. The transponder comes with Velcro strips with their own adhesive that you would normally stick onto the windshield, but now you’ll stick them on the shiny side of the piece of Sticker Shield you just cut.
Can I wrap my EZ Pass in foil?
You’ll need to remove your toll transponder or E-Z Pass or Sunpass from your vehicle. If you don’t want to remove it, you can wrap it in tin foil and place it in your glove compartment or center console.
What is a Flex transponder?
E-ZPass Flex is an E-ZPass with an additional switchable feature designed specifically for those traveling on Express Lanes. This transponder will specifically benefit those who are traveling with the number of people in their vehicle required to qualify for an HOV discount (2 or 3 depending on the roadway).