Why is my Leviton dimmer switch not working?
While uncommon, a dimmer or switch may become unresponsive when the on/off paddle or dim/bright bar is pressed. You must power cycle the device in these cases. Simply elevate the bottom of the dim/bright bar until the light or LED at the bottom of the dimmer goes off if it’s a dimmer (DH6HD or DH1KD).
How do I pair my Leviton smart dimmer?
– Locate and open the Leviton “Decora Digital Dimmer & Timer” app on your smart device. – Select the “+” sign at the top right corner to add your Decora Digital device. – Follow the on-screen instructions to pair your smart device: – Hold the OFF button on your Decora Digital device until its status LED blinks.
How do I reset my Leviton light switch?
This procedure can also be used to place the accessory in ready mode with the locator LED flashing green: • Hold the top of the paddle for 7 seconds. – After 7 seconds the Locator LED will blink amber. Release the top of the paddle and the switch will reset. Once the switch has reset the Locator LED will blink green.
How do I fix my Leviton smart switch?
In these instances, you need to power cycle the device. If it is a dimmer (DH6HD or DH1KD), simply lift the bottom of the dim/bright bar until either the light or LED at the bottom of the dimmer turns off. Wait 5 seconds and then push the dim/bright bar back in, the dimmer will restart.
How do I reconnect my Leviton Smart switch?
Simply press and hold the up paddle/button for 3 to 5 seconds and then release. This reboots the device and runs a diagnostic mode. Watch the LED at the bottom and take note of the color pattern that flashes after you release the button. After a minute, check your app to see if the device has come back online.
Do all dimmers need a neutral wire?
As for the neutral requirement, smart devices are a load in series with the light. If the light is off, without a neutral you won’t have a complete circuit to power the smart dimmer circuitry.
Why is my Leviton light switch not working?
To power cycle a switch (DW15S), you will need to flip the circuit breaker powering the switch off for 5 seconds, and then flip back on. In most cases this will address your situation. If the loss of control continues or if you have any questions, please contact support at [email protected].
Why is my Leviton not working?
Make sure you have the latest version of the My Leviton App. To ensure that you are running the latest version of the app, check for a My Leviton app update on the Apple App store or Google Play store. If available, try using a different mobile phone or tablet running the My Leviton app.
Why is My Leviton light switch not working?
Does Leviton require a neutral wire?
Leviton’s latest smart switch doesn’t require a neutral wire.