How do I program my Yale alarm?
Burglar Alarm User Instructions
- Press Command Button.
- Press blank button beneath Arm.
- Enter your code number.
- Press Yes to arm all areas authorized for your code number.
- The display reads System On.
How do I turn off the tamper protection on my Yale alarm?
Before mounting it is important to disable the system tamper to avoid the siren sounding an alarm. Using the Keypad: 1 Press button A and enter “0000” to enter test mode, press A then “2” to send “Tamper Off” signal. The siren will beep in acknowledgement.
How do I reset my Yale smart alarm?
Reset the Yale Smart Keypad
- Open the Yale Access App and go to House Settings.
- Select the Yale Smart Keypad to enter Keypad Settings.
- Select Disconnect Keypad and then the blue DISCONNECT button.
How long does Yale alarm battery last?
How often will I have to change the batteries in my alarm system? Batteries should be replaced every 2-3 years. Each detector, siren, control panel will inform you when this is required.
How do you reset the code on a Yale Keyless door?
How do I Factory Reset my lock?
- Open the Yale Access App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked.
- Select the Settings menu (gear icon).
- Select the device you wish to reset.
- Scroll to factory reset.
- Select Reset Lock.
How do I clear my fault log on Yale alarm?
Use the up and down arrows to see what it listed on there, fix the problem i.e. change the batteries or check the tamper and to clear the fault log down, press the circle arrow once and the screen will say clear fault display and then press tick.
Why is my Yale sensor flashing orange?
The orange light will flash on initialisation, when the battery tab is removed.
Why does my house alarm keep saying tamper?
Is your alarm giving you a tamper fault code? A tamper warning code could result from the tamper peg not connecting correctly, the improper mounting of your device, or an intruder. Some devices, like our sensors, hub and siren, come with tamper seals too, and you’ll get a code when one of those is broken.
Is this alarm system compatible with Yale’s HSA system?
This alarm system is only compatible with HSA alarm accessories. Please note the prefix “HSA” on the front of the part number to indicate compatibility. The phone feature and remote notifications require our central server. Yale reserves the right to charge for this service in the future.
Is there planned maintenance for Yale Smart Sync?
Attention: Yale Smart Sync, SR and HSA App Alarm users. There is planned system maintenance due to take place over the next two weeks. Some potential outages could occur during this period.
How do I contact Yale alarm kit support?
Should you have any questions or experience a problem with your Alarm Kit, please contact our Consumer Support Helpline. Tel: 01902 364606 Monday – Friday 8.30am – 5.30pm Email:[email protected] 9Troubleshooting (cont.)
Is my alarm system compatible with my HSA card?
This alarm system is only compatible with HSA alarm accessories. Please note the prefix “HSA” on the front of the part number to indicate compatibility. The phone feature and remote notifications