How do I reset Mybookworld?
You can try resetting the unit using the physical button on the back of the unit. You can do a 4 seconds reset and this will reset the passwords on the unit back to factory defaults.
How do I reset my wd10000h1nc 00?
Connect power cable and wait for it to cycle on then off automatically. It does this so that a powered down unit doesn’t power up after a power cut. Then press and HOLD the ‘Reset button’ and power up using the ‘Power button’ … hold the ‘Reset button’ for 60 seconds.
How do I reset my passport hard drive?
Manually Resetting the Drive With the power ON , hold down the Power and WPS buttons at the same time for around 10 seconds until the drive reboots and the Power and Battery Status LED flashes white. Wait until the Wi-Fi LED is blue before reconnecting.
How do I restore my WD Passport to factory settings?
On the Admin tab of the Dashboard, under “Restore Factory Settings” section, there are two options, “System Only” and “System and Disk”. The second option DOES wipe all the data on the MPW, so be careful with that one.
How do I connect my WD My Book World Edition?
To enable SMB1 on Windows 1803 workstations:
- Search in the start menu for ‘Turn Windows features on or off’ and open it.
- Search for ‘ SMB1 . 0/CIFS File Sharing Support’ in the list of optional features that appears, and select the checkbox next to it.
- Click OK and Windows will add the selected feature.
How Do I Connect My Book World Edition?
Connect one end of the Ethernet cable into the Ethernet port located on the back of the unit. 2. Connect the other end of the Ethernet cable directly into a router or network switch port. 3.
How do I reformat my WD external hard drive?
Plug in the drive and open Windows Explorer. Right-click the drive and choose Format from the drop-down menu. Select the file system you want, give your drive a name under “Volume label,” and make sure the Quick Format box is checked. Click Start, and the computer will reformat your drive.
Does WD Passport need to be formatted?
If you want to use WD My Passport or any other hard drive on Mac and PC, you need to format a Western Digital My Passport external hard drive in exFAT or FAT32 format.
How do I connect my WD My Cloud to my network?
Connect your My Cloud Home
- Place the WD My Cloud Home near your router.
- Connect the power adapter to the My Cloud Home and to a free power outlet.
- Connect the network cable to your WD My Cloud Home and your router or modem.
- Wait until the white light comes on.
How do I reset my WD My Cloud IP address?
One can set or change the IP within the My Cloud by accessing the My Cloud Dashboard > Settings > Network > Network Services > Network Mode. Generally its better to leave the My Cloud configured for DHCP and set / assign / reserve the IP address for the My Cloud in the local network’s router.