What is the CPSC regulatory limit value for lead in paint?
0.009 percent
Lead in Paint and Similar Surface Coatings. All children’s products, and some furniture, for adults and children, must not contain a concentration of lead greater than 0.009 percent (90 parts per million) in paint or any similar surface coatings. Household paint must also meet this requirement.
What does it mean to be CPSIA compliant?
CPSIA Compliance The Consumer Product Safety Improvement Act of 2008 (CPSIA) imposed testing requirements and new acceptable levels for several substances common in most consumer products, especially those designed for children, ages 0-12.
What are acceptable levels of lead in paint?
Federal law lowered the amount of lead allowable in paint to 1% in 1971. In 1977, the Consumer Products Safety Commission limited the lead in most paints to 0.06% (600 ppm by dry weight). Since 2009, the lead allowable in most paints is now 0.009%. Paint for bridges and marine use may contain greater amounts of lead.
What is the permissible exposure limit for lead?
The following exposure limits are for inorganic Lead compounds (measured as Lead): OSHA: The legal airborne permissible exposure limit (PEL) is 0.05 mg/m3 averaged over an 8-hour workshift. NIOSH: The recommended airborne exposure limit (REL) is 0.05 mg/m3 averaged over a 10-hour workshift.
What is CPSIA warning?
Definition. Values. cpsia-warning1 cpsia-warning4. Use this field to indicate if a cautionary statement relating to the choking hazards of children’s toys and games applies to your product.
Is there a safe level of lead exposure?
There is no known safe blood lead concentration; even blood lead concentrations as low as 5 µg/dL may be associated with decreased intelligence in children, behavioural difficulties and learning problems. As lead exposure increases, the range and severity of symptoms and effects also increase.
What is the OSHA lead standard?
The lead standards establish a permissible exposure limit (PEL) of 50 μg/m3 of lead over an eight-hour time-weighted-average for all employees covered. The standards also set an action level of 30 μg/m3, at which an employer must begin specific compliance activities, including blood lead testing for exposed workers.
What is the threshold for lead?
OSHA set a Permissible Exposure Limit (PEL) for lead in workplace air of 50 µg/m3 (8-hour time weighted average). OSHA mandates periodic determination of BLL for those exposed to air concentrations at or above the action level of 30 µg/m3 for more than 30 days per year.
Who permissible lead limit?
According to the World Health Organization and US Environmental Protection Agency guidelines, maximum allowable concentration of lead in drinking water are 0.01 mg/l and 0.015 mg/l , respectively [16, 17]. Arsenic is present in abundance in underground water.
What is the threshold limit value for lead exposure?
The NIOSH Recommended Exposure Limit (REL) for lead is a Time Weighted Average of 50 micrograms per cubic meter of air (µg/m3) over 8-hours. The required (OSHA) Permissible Exposure Limit (PEL) for lead is also no greater than 50 µg/m3 averaged over an 8-hour period.