How do I activate Cradlepoint on Verizon?

How do I activate Cradlepoint on Verizon?

To activate the modem.

1. Log into the router’s NCOS Page. For help with logging in please view NCOS: Accessing the Setup Pages of a Cradlepoint router.
2. Click Connection Manager on the navigational pane.
3. Select the EVDO Modem, click Control.
4. Click the Activate.

Does Cradlepoint work with Verizon?

Cradlepoint Solutions Wireless edge solutions work seamlessly with the Verizon LTE Advanced and 5G network today To help businesses stay more connected, responsive and productive than ever before.

How do I connect to Cradlepoint?

1. Click START.
2. Click CONTROL PANEL.
3. Click NETWORK AND INTERNET.
4. Click CONNECT TO A NETWORK (under network and sharing center) You’ll see a list of available wireless networks.
5. Click the CradlePoint Network.
6. Click CONNECT.

What is the default username and password for Cradlepoint?

Log in to the device from the LOGIN screen. The default username is “admin.” The default password is supplied with your router.

Where is the IMEI on Cradlepoint?

Click the Network Interfaces tab on top of the Devices page. Click the [iii] (Column Selection) icon at the top right of the page. Select IMEI. Find the IMEI now displayed on the page.

How do I find my Cradlepoint IP address?

1. Look at the sticker on the device, note the MAC Address.
2. Connect Ethernet Cable to Ethernet Port on Windows PC.
3. Connect other end of Ethernet Cable to LAN Port on Cradlepoint Device.
4. Open Windows Command Prompt.
5. Type ” arp -a ” and press ” enter/return ” on your keyboard.

What type of SIM card does a Cradlepoint use?

NOTE: Cradlepoint products support IPv4/IPv6 SIM cards but not IPv6-only SIM cards. The SIM slots in these Cradlepoint products are designed to accept “Mini-SIM” cards, also referred to as a “2FF”. These “Mini-SIM” cards measure 25.0mm x 15.0mm x 0.76mm.

Where does SIM go in Cradlepoint?

To properly insert your SIM card into a CradlePoint modem, slide it into the modem’s SIM slot while its gold contacts are facing downward, with the notched corner going in first. Make sure that the modem is also facing correctly, with its label appearing on the bottom. Push the SIM in until you hear a click.

What is a Verizon device ID?

The device ID appears on the sticker on the back of the OBD reader (opposite side of the Hum logo). The device ID also appears on the sticker on the end of the Hum device packaging. If the ID can’t be viewed from the device or the box, refer to View Device Info – Verizon Wireless Website.

Does a WIFI router have an IMEI number?

If there’s physical access to the router, the IMEI can be found on the label on the bottom of the router (for internal modems), or on the modem itself (for integrated modems).

What is the IP address of my Cradlepoint router?

192.168.0.1
By default, the Cradlepoint router uses the IP address of 192.168. 0.1.

How do I reset cradlepoint AER1600?

RESET: To restore the AER1600/AER1650 to its factory default settings, press and hold the RESET button on the back of the device for ten seconds. Reset returns the login password to the DEFAULT PASSWORD and resets all configuration changes.

How do I log into my Cradlepoint router?

For most Cradlepoint routers, you will type http://192.168.0.1 into your address bar, then push Enter.

1. Enter default username: (leave blank). Enter default password: (Last six digits of MAC Address).
2. If you have changed the default username and password, you will need to enter your new username and password.