What is the specification of lithium-ion battery?

Though the nominal voltage of lithium ion cells with different chemistries varies between 3.2 to 3.7 V (with the exception of Lithium Titanate cell which has the nominal voltage of 2.4 Volts), the charging voltage of lithium cells is usually 4.2V and 4.35V, and this voltage value may change with the different …

Table of Contents

How do you read lithium battery specs?

This battery is rated at 3,200 mAh, meaning that in one hour, it can discharge 3,200 milliamps (3.2 amps) and then it’s done….The math is super simple:

Voltage = current x resistance.
Current = voltage / resistance.
Resistance = voltage / current.

What does PL on a battery mean?

Lithium Polymer Battery. Lithium polymer battery outer covering is only 0.13mm thick with aluminum laminate film. This battery’s characteristics are of its highly flexible dimension, capacity, specifications, low self discharge rate, high energy density and environmental friendliness.

How do you calculate lithium-ion battery capacity?

• Multiply the Ah by 0.3 gm to determine the amount of Lithium in each cell:

2.5 x 0.3 gm = 0.75 grams of lithium in each cell. • Multiply the amount of lithium in each cell by the number of cells in each battery:
0.75 grams/cell x 6 = 4.5 grams of lithium in the battery.
11.1 V x 4.4 Ah = 48.8 Wh.

How many Ah is a battery?

Capacity – Amp hours (Ah): As the name suggests this means how many amps the battery can deliver in an hour. For example, a 12V lithium battery with a capacity of 100Ah can deliver 100A to a 12-volt device for one hour. The same 100Ah battery could supply power for 4 hours (100/25=4) to a 25 ampere device.

What is the ampere of lithium-ion battery?

Ampere Rating Available from 10 Milli Ampere to 100 Ampere.

What does ICR mean on a battery?

lithium cobalt oxide cylindrical
ICR and IMR cells are the most common types used and discussed here. ICR = lithium cobalt oxide cylindrical cell. I = lithium ion. C =cobalt oxide cathode.

What is Li ion Fe?

Lithium Iron Phosphate (Li-Fe) is new generation Li-Ion rechargeable battery for high power applications, such as Electric Vehicles, Power Tool , RC hobby.

What’s the difference between UN3480 and UN3481?

The easiest way to explain this is that a laptop would be considered UN3481. The lithium-ion battery inside the laptop is providing power to the actual laptop (equipment). The battery inside that laptop is classified as UN3480. A battery shipped alone would be classified UN3480.

How is mAh calculated?

mAh is calculated by multiplying the amount of time the battery lasts by the amperes of the discharge current. That may sound complicated, but it’s really not. If you have a battery and you don’t know what it’s capacity it is, all you have to do is hook it up to supply a 1000 mA discharge and see how long it lasts.

What is the difference between mAh and Ah?

Key points: mAh is an acronym for milliampere-hour. It is simply a smaller version of Ah. Milli-ampere-hour stands for the thousandths of ampere-hour. So, mAh = 0.001 * Ah.

How do you calculate battery capacity?

Battery life calculation formula:

Battery (month) = Capacity(Ah) / 30 x I(Ah)
Here the load current I(Ah) in Amps hours is equal to the total load P(W) divide by the battery voltage V(V) in volts.
Hence, while increasing the load, the battery life will be reduced.

What does Ah and Wh mean on a battery?

Voltage * Amps * hours = Wh. Since voltage is pretty much fixed for a battery type due to its internal chemistry (alkaline, lithium, lead acid, etc), often only the Amps*hour measurement is printed on the side, expressed in Ah or mAh (1000mAh = 1Ah).

What does INR mean in battery?

Lithium nickel rechargeable
Lithium nickel rechargeable or INR Batteries use a LiNiMnCoO2 nickel-manganese-cobolt oxide (NMC) hybrid chemistry for increased energy capacity.

What is the difference between IMR and ICR batteries?

Furthermore, ICR batteries are low-draining, while IMR batteries are not. This means that even though their mAh rating is often lower than those of ICR, they will last longer between charging sessions due to being high-draining. They also have a lower internal resistance for more sustainability.