What is the top rail of a chain link fence called?
17-gauge galvanized top rail is part of the fence framework and helps support the chain link fabric horizontally. These posts are used at the top of a chain link fence to allow the chain link fabric to attach. Made from galvanized steel, this top rail connects to terminal posts with rail ends and brace bands.
How do you connect the top rail chain link?
The end of the top rail fits into the rail end fitting, attached to the terminal post as shown in figure 12. Join the top rail together by sliding the small end (swedged-in) into the larger end. If not swedged, a sleeve will be necessary that slides on the outside of the rail, adjoining the two sections together.
How do you remove a chain-link fence post cap?
Remove the clamps holding the fence fabric to the post. The clamps are generally attached with a bolt and nut. Loosen the nut with a wrench and pull the bolt out. Pull the clamps off the fence post. The fence will slacken, but shouldn’t fall.
Do you need top rail on chain link fence?
Almost all permanent chain link fences have a top rail to support the weight of the chain link fabric and keep it from sagging over time.
How long are top rails for chain link fence?
The metal top rail for chain link fencing comes in 10 foot 6 inch lengths.
Does chainlink fence need a bottom rail?
The most obvious solution for securing a chain link fence is to install a bottom rail, just like you have on the top of the fence. This does not work for all circumstances though. If the fence sits on a steep slope, it may be trick to attach a bottom railing.
What size is chain link top rail?
Out diameter: 1-3/8 & 1-5/8 in. Wall thickness: 9 to 17 gauge. Length: 21 and 24 ft.
How do you measure a top rail fence?
1) Determine the Top Rail Size and Length The easiest way to do this is to measure the distance between two vertical fence posts, then multiply this number until you’ve covered the full span of the damaged material.