How do you add threaded holes in NX?

How To Drill Standard-Sized Threaded Holes In Siemens NX®?

Table of Contents

Click on the Hole command in the Siemens NX® interface.
Select the Threaded Hole option.
Specify the hole locations.
Select the exact hole locations on this face in the Hole command.
Select the direction of the hole.
Select the size of the threaded hole.

How do you screw holes in Autocad?

From the ribbon, Content tab , Holes panel, select Tapped Blind Hole. Select UNC (Regular Thread – Inch), but this time, select the Front view first. Follow the prompts to indicate the starting point, the direction, and the size of the hole. Then drag the size or type a distance, in this case, 1 unit.

How do I show threads in NX Drafting?

Drafting > General/Setup > Customize Standard. View > Common > Set Display type as you needed. Changes to the customer defaults will be effective in the new parts once you restart the NX session.

How do you put a hole in a shaped shape?

Hole

Create a sketch with sketch points.
Select the points where you want to create holes, then click . You can click the. in order to select inferred Mate connectors as points instead of sketch points.
Select a hole style: Simple (a uniform-diameter drilled hole) Counterbore.

How do you show threads with Hole Wizard?

To get there go to Tools > Options > Document Properties . In the Detailing section, there are two options that need to be selected, ‘Cosmetic threads’ and ‘Display annotations’. If you are looking to add a shaded view of cosmetic threads in the hole, the option ‘Shaded cosmetic threads’ will also need to be selected.

How do you add a hole in a thread in Solidworks?

Start by creating a cylindrical extrusion or cylindrical hole, much like the initial steps to of making a cosmetic thread. The feature size should be the same as the nominal thread diameter. From there, select the starting edge. Then, click “Insert” then “Feature” and “Thread.” This will automatically create a thread.

How do I delete my face on Siemens NX?

On the Synchronous Modeling toolbar, click Delete Face , or choose Insert→Synchronous Modeling→Delete Face. In the Delete Face dialog box, in the Type group, select Face. Click Select Face and select the slot faces and their connected blend faces as shown in the image below. Click OK or Apply.

How do you use assembly constraints in NX?

First, open the Constraint Navigator and select the driven angle constraint to edit. The traditional Assembly Constraints dialog opens, we see a new field for Angle constraint. When the Angle option is toggled on, the user defines the value.

How do I edit a part family in NX?

To edit the members you need to open the parent template and open the Part Families command (Menu > Tools > Part Families) and then select the “Edit Spreadsheet” option to invoke the Part Family Spreadsheet.

How do you color a part in NX?

From Filters, set the Type filter to ‘Solid Body’ > Select the component > Change the color > Under Settings of the ‘Edit Object Display’ window, check the options ‘Apply to All Faces of Selected Body’ and ‘Apply Changes to Owning Part’ > OK.