Can you use a 2×10 joist hanger on a 2×12?
Hangers can be used with both their matching nominal joist size and the next size up—2×10 hangers are approved for use with 2x10s and 2x12s, for example.
How much weight can a joist hanger take?
These hangers are bent to 45 degrees and can be installed with joist hanger nails using the same method as straight joist hangers. Angled joist hangers should be available at your local lumberyard for 2×6 and 2×10….Joist Hanger Vertical Capacity.
| Joist Size | Min Capacity lbs |
|---|---|
| 2×6 | 400 |
| 2×8 | 500 |
| 2×10 | 600 |
| 2×12 | 700 |
Is it better to use joist hangers?
Joist hangers are better because they allow for more accurate placement of joists. They also allow for toe-nailing, plus support the underside of the joist. This makes the hanger stronger than a toe-nail. While joist hangers are an expense, the ease and increased strength make them a better choice.
Can you attach joists without hangers?
The most common alternative to using joist hangers is a ledger strip. This technique requires a plank of wood to be secured to the outside wall and to the outside rim of the deck to create “ledges” where the joists would rest for support.
Can I use Simpson screws for joist hangers?
Fastener Design Information In some cases, it is desirable to install Simpson Strong-Tie face-mount joist hangers, post basses and caps, and straight straps and with nails that are a different type or size than what is called out in the load table.
Is it oK to use screws on joist hangers?
While structural nails are typically used to fasten joist hangers, you may be wondering if screws can be used instead. You can use screws explicitly made for joist hangers. However, avoid using any other types of screws as they cannot support joist loads and are not designed to withstand shear force.
Is it oK to use deck screws for framing?
Our inspectors have seen a disturbing trend of late: people using wood or deck screws when building structural elements. This means ordinary wood screws cannot be used to attach rafters to top plates, or joists to beams. Nor can wood screws be used to install joist hangers.
What screws should I use for joist hangers?
Joist hangers should be installed with hot-dip galvanized structural nails whenever possible. 16d and 10d nails are usually recommended for most applications.