Has the Seiko SKX been discontinued?
In 2019, Seiko officially announced the discontinuation of the Seiko SKX. This means they’re harder to find, and even when you do find one, its price is going to be heavily inflated. Prior to being discontinued, the Seiko SKX was often sold for $150 – $250, depending on its condition.
What movement does the SKX007 have?
7S26
Case and Movement Seiko’s low-end automatic movements are renowned for being bulletproof, and the Seiko SKX007 is fitted with the venerable 7S26. The downside of this movement is that it does not hack, so is hard to set to the exact time, and it does not support hand-winding, so you have to be active to keep it wound.
How can you tell a fake Seiko SKX007?
The genuine SKX007 has a recessed lume pip — it should NOT stick out from the bezel insert at all. See below for how your lume pip should look on a genuine SKX. If you are looking at a 009, which has a bicolor bezel, the red and blue sections should split the “20” on the bezel in half.
Is SKX007 waterproof?
The Seiko SKX007 is certified to ISO 6425 which is the standard used for diving watches. It has the classic sporty look of a divers watch and is water resistant to 660 feet (200 meters or 20 ATM).
How accurate is skx007?
In terms of accuracy however, the range is quite large, rated at approximately -20 to +40 seconds per day. The movement can be adjusted to achieve greater accuracy, however, and they sometimes come relatively precise right out of the box (my particular piece runs approximately 4 seconds fast a day).
Does the Seiko SKX007 have a battery?
It has the automatic 21 jewels movement so it does not require battery since it recharges while you wear it (with the movement of your wrist). This Seiko diver’s watch is simply better. This is an automatic mechanical watch. This watch combines environmentally friendly technology, with a rugged and stylish design.
Where is SKX007 made?
Under the bonnet of the SKX007, you really do get a proper Seiko-made self-winding mechanical. The 7S26 is, admittedly, the Japanese brand’s most basic calibre, machined, finished and hand-assembled at Seiko Instruments’ Malaysian plant in Johor, near the border with Singapore.