Menu Close

How do I connect to iSCSI Ubuntu?

Admin

How do I connect to iSCSI Ubuntu?

Debian / Ubuntu Linux Connect to an iSCSI Volume

  1. Install Open-iSCSI Initiator. Type the following command at a shell prompt:
  2. Open-iSCSI default configuration. You need to soft-link (path fix) few two files to autologin work i.e. fix file paths for iscsiadm, enter:
  3. Format iSCSI Volume.

Does Ubuntu support iSCSI?

Ubuntu Server can be configured as both: iSCSI initiator and iSCSI target. This guide provides commands and configuration options to setup an iSCSI initiator (or Client).

How do I connect to iSCSI Linux?

Steps to Connect And Mount ISCSI Target on Linux Server

  1. Install iscsi-initiator-utils rpm package on client Linux Machine.
  2. Share iSCSI initiator ID with Storage Admin.
  3. Discovering & Login to targets in iSCSI LUN.
  4. Check if the disk added Linux Machine.
  5. Create a partition on newly attached disk.

How mount iSCSI target Linux?

Procedure

  1. Start the Tivoli Storage Manager recovery agent.
  2. In the Choose mount destination dialog, select Mount an iSCSI target .
  3. Create a target name.
  4. Enter the iSCSI Initiator name that was recorded in Step 1 and click OK.
  5. Verify that the volume you just mounted is displayed in the Mounted Volumes field.

How do I start iSCSI initiator service in Linux?

Procedure

  1. Configure the iSCSI-initiator daemon by editing the /etc/iscsi file. [root@R64SRV6 ~]# cd /etc/iscsi/ [root@R64SRV6 iscsi]# ls initiatorname.iscsi iscsid.conf [root@R64SRV6 iscsi]#
  2. Manage the software by using the chkconfig command and the service command.
  3. Use the default settings for the iSCSI initiator.

How do I set up an iSCSI server?

Connect the iSCSI target with the Windows iSCSI initiator.

  1. Launch the iSCSI initiator at Control Panel > Tools.
  2. On the iSCSI Initiator Properties page, click Discovery.
  3. Enter the IP address of the NAS and then click OK.
  4. Click Targets and then select the available iSCSI targets that you want to connect.
  5. Click Connect.

How do I start an iSCSI service?

Procedure

  1. In the Windows Services list, right-click Microsoft iSCSI Initiator Service.
  2. Click Properties.
  3. On the General tab, set the following options: In the Startup type list, select Automatic. Click Start, and then click OK.

How do I mount iSCSI?

How do you use iSCSI?

Connect the iSCSI target on Windows

  1. Launch the iSCSI initiator at Control Panel > Tools.
  2. On the iSCSI Initiator Properties page, click Discovery.
  3. Enter the IP address of the NAS and then click OK.
  4. Click Targets and then select the available iSCSI targets that you want to connect.
  5. Click Connect.
  6. Click OK.

How do I make an iSCSI drive?

Creation of iSCSI Virtual Disks

  1. Specify iSCSI Virtual Disk Name.
  2. Specify iSCSI Virtual Disk Size.
  3. Designate whether the iSCSI Virtual Disk will be assigned to an Existing iSCSI Target or a New iSCSI Target on the Assign iSCSI Target screen.
  4. Specify iSCSI Target Name.
  5. On the Access Servers screen, select Add.