How do I connect my Clearlight sauna to WiFi?
Setup Instructions:
- Go to to the WiFi settings on your iPhone (Settings –> WiFi)
- Choose the WiFi Network for your sauna. It will start with “wifi followed by 12 numbers and letters, e.g. “wifi-xxxxxxxxxxxx”.
- Select this WiFi Network.
- Open the Clearlight Connect App and you will now be connected to your sauna.
How do I know if my master spa has WiFi?
The WiFi module for Master Spas hot tubs can be installed before your spa arrives or after it’s been delivered. It will be in the cabinet of your spa, near the controls. Using the app from Balboa Water Group, you can be at home, work, or abroad and still be able to control your hot tub or swim spa.
Where is the high limit reset button?
The High Limit Reset Button is located behind the gas valve.
Is there a reset button on my master spa?
Press the red reset button to reset the switch before reaching out to tech support. Make sure the temperature probe is properly in the right amount of water to accurately read the temperature, and that there is no build up in the thermal well.
Why did my Jacuzzi bathtub stopped working?
Blockages in your tub’s circulation system may also prevent the tub from properly heating. The fix may be as simple as cleaning or replacing the tub’s filters. If there’s an airlock in the water lines because the water supply was recently filled, you may have to call a plumber to resolve this issue.
How do I connect my Bluetooth to my SaunaLogic?
Press & hold Bluetooth button again until you hear a 2nd beep & release. should now be in pairing mode. 9) Once you have selected and connected to the SL2 Control’s hotspot, tap on “SaunaLogic” located at the top left of the screen to go back to the SaunaLogic App and continue with the pairing process.
How do I connect my BWA module to Wi-Fi?
Go to your Wi-Fi settings screen and look for the BWG SPA network (it will be named similar to BWGSpa_12345). In our example it is BWGSpa_0E608F and connect to it. No password is needed. You are now directly connected to your hot tub and can control all the hot tub functions via the bwa™ app.
How do I reset my lazy spa WiFi?
Remove your current spa from the app. Hold down the WiFi button for 5 seconds until you see a slow flashing LED. Restart the connect process using your app.
How do I reset my high limit switch on my hot tub?
The High Limit Switch Needs to Be Reset or Replaced Simply reset by pressing the big red button on your spa pack. The high limit switch may be housed in a thermowell. If the water temperature in the thermowell is the same as the water temperature in the rest of the spa, the switch is damaged and needs to be replaced.
Why does my hot tub keep cutting out?
Check for blockages, and clean or replace your filter. If that doesn’t help, check to see whether your circulation pump has power going to it. If it does, and it’s still not working, it may be time to replace the circulation pump. This code may also mean your pressure switch needs to be replaced.