What should the action be on a bass guitar?
A good bass setup is all about compromise, and as a guitar technician, you always have to find the best balance between playability and the most amount of fret buzz that you’re willing to tolerate. Some common action measurements on a bass guitar are around 5/64″ up to about 7/64″.
How high should the action on a bass be in MM?
Measuring at the 12th fret (as in the photo), the action height should be 2.6 mm for Steel String Acoustic guitar, 1.8 for electric, 2.0mm for bass and 3mm for a Classical.
Should a bass have high action?
A bass with high action requires more effort and can create problems for younger players who don’t have enough strength to get a good tone. Another common problem is low action, where the strings are practically touching the fretboard without any help from the player.
How do I make my bass action higher?
If your bass has individual saddle height adjusting screws, make general action adjustments by raising or lowering the entire bridge, then make your final adjustments by changing the height of the individual string saddles. Individual string saddles are generally adjusted with allen wrenches.
What is considered high bass action?
If you hardly press the string down and see the bass is really hard for you to play, then the bass action is too high, and you should lower it.
How does pickup height affect tone on bass?
Therefore, in my opinion, pickup height in relation to your strings does make a tonal difference. Raise your pickups as high as you can and you will also expierence a tonal change, sometimes creating issues and a fuzzy out of phase tone on some basses. Try it out for yourself, it’s easy to reverse.
Why is it important to adjust the action on a bass?
Learn more… Adjusting the action on a bass (which is the height of the strings from the fret board) is an important part of the overall setup of the instrument. This must be done when the instrument is new.
What is the normal height of the action on a bass guitar?
It depends on the desired tone and projection of the string, although the standard height is 7/64” for bass guitar strings. Thanks! What is the normal height measurement of the action? Conventionally, the bass side of the action should be set to 7/64”, while the treble side is set to 5/64”.
How to set up a bass guitar?
The first step to dialing in your bass guitar’s setup is tuning your bass to pitch and setting your neck to the proper relief. This refers to the amount your neck bows away from the strings. If your strings are old, not staying in tune, or have lost their mojo, you’ll want to install a new set first.
What should the bass side of the action be set to?
Conventionally, the bass side of the action should be set to 7/64”, while the treble side is set to 5/64”.