Menu Close

Do I need a tune after FMIC?

Do I need a tune after FMIC?

yes, a fmic will change your MAF scaling and your a/f ratio’s. It definitely needs to be tuned.

Do you need a tune for a bigger intercooler WRX?

No, you don’t need a tune. But you’re not taking advantage of the new part either. With increased cooling you can run more aggressive timing.

What is tmic and FMIC?

Tmic is good for stock location turbos, pretty much all of them. You WILL heat soak much faster the larger you go in the stock location. FMIC is meant for rotated setups that are pushing >400whp and are utilizing a larger turbo to do so.

Does a Fmic add horsepower?

Under ideal conditions, both will probably make the same HP, but in non-ideal conditions, the stock FMIC will make less HP. IC cools the charged air, cooler air is more dense, so can fit more in the cylinder, and add more fuel to burn -> more hp. But it depends on size, efficiency, and design.

What does Fmic stand for cars?

(Front Mounted Intercooler, Top Mounted Intercooler, Side Mounted Intercooler) terms which refer to the placement of the charge air cooler in the engine bay and in reference to the engine. Typically FMICs provide the best cooling capability, as they are located in front of the radiator for optimum airflow.

How much HP gain from intercooler?

Depending on all these variables, an aftermarket intercooler may be worth power gains of between 5% – 10% above the gains that an OEM intercooler may provide.

Why does Subaru use top mount intercooler?

Which Subaru intercooler has better airflow? A top mount intercooler will be more efficient with airflow than a front-mounted, with the only reason being the shorter path from your turbochargers to intake. You’ll get air quicker and sooner, but don’t confuse this with lag, as it is pressurized.

What is Fmic car?

What is main purpose of using intercooler with compressor?

Functions of Intercoolers The air compressor intercooler’s main function is to cool air before it enters the next stage of compression. The higher density of cool air makes it easier to compress than hot air.