Menu Close

How do I reset my Indesit washing machine?

How do I reset my Indesit washing machine?

Indesit washing machine factory reset instructions are as follows:

  1. Switch off the power and unplug the machine.
  2. Turn on the machine using the on/off button.
  3. Set the timer control to the zero position.
  4. Plug the machine back in.
  5. Switch on the power.
  6. The display lights should now be flashing.

What does it mean when all lights are flashing on washing machine Indesit?

End light flashing Indicates that the Indesit washing machine has reached the end of a wash programme. If the wash, rinse and spin function lights all flash at the same time, this would indicate a possible blockage in your filter or waste / drain pipe.

Why is my Indesit not spinning?

Worn carbon brushes Once the brushes are worn down to the point that they no longer make an adequate connection to the motor the machine won’t spin. The brushes will need to be replaced. Carbon brushes aren’t expensive so this appliance repair is certainly cost-effective.

How do you reset Indesit iwc71452?

Try to unplug the washer from the outlet for 2-3 minutes, then right after press and hold the start button for 3 seconds. This should reset the controls and allow you to put the washer into a drain/spin cycle.

Why does my washing machine not start?

First, make sure the power is on and that the machine is plugged in. You should check the outlet to make sure it’s working. Then, check if a fuse is blown or a circuit breaker thrown. If those both work, see if the Delay Start button or Control Lock feature has been activated.

Why do the lights on my washing machine keep flashing?

If your washing machine detects an unbalanced or excessive wash load this will cause the spin light to flash. New machines will try to redistribute the load – but you may have to do this manually.

How do I fix the flashing light on my Indesit washing machine?

All lights flashing on washing machine The pump filter will need to be cleared of any debris, and the drain hose will need to be unscrewed from the spigot to allow the excess water to be emptied out. These jobs are all easily performed by an appliance repair technician.

Why does my Indesit washing machine have no electrical supply?

My Indesit washing machine appears to have no electrical supply Check that the socket your Indesit washing machine is connected to is live by plugging in and testing another piece of equipment such as a radio. Your Indesit washing machine comes fitted with a 13 amp plug and lead, please ensure that the correct rating of fuse is being used.

What should I do if my Indesit washing machine empties under the sink?

If your Indesit washing machine empties into the waste system under the sink, please ensure that the connection to the sink plumbing is clear from any blockages; such as a build up of food deposit or fat.

What kind of appliances does Indesit do?

Indesit | Washing Machine Faq | Indesit Service Brand Service Parts Appliances Laundry Appliances: Laundry Washing Machine Washer Dryer Repair Tumble Dryer Repair Dishwashers Appliances: Dishwashers Dishwashers Integrated Dishwashers Slimline Dishwashers Cooling Appliances: Cooling Fridge Freezers Fridges Integrated Fridge Freezers Freezers Cooking

What do Indesit washing machine flashing lights mean?

There are five LED Indesit washing machine flashing lights on the display. Depending on the fault one or more of the lights will blink. This’ll indicate where the issue is. Light flashing covers faults with pre-wash, wash, spin, and end of programmes. The codes go from F01 to F18.

How To Reset Indesit Washing Machine

  1. Switch off the power and unplug the machine.
  2. Turn on the machine using the on/off button.
  3. Set the timer control to the zero position.
  4. Plug the machine back in.
  5. Switch on the power.
  6. The display lights should now be flashing.
  7. Turn off the machine with the on/off button.

Why are the lights flashing on my washing machine?

Why is my Indesit washing machine not spinning?