How do I pair my Plantronics BackBeat 903 Bluetooth headset?
Press and hold the power button for 5-6 seconds, until light on the headset starts flashing an alternating red-blue. Release the power button and set the headset aside. On your cell phone/device, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset.
How do you turn on Plantronics BackBeat Bluetooth headphones?
Power on the headphones by pressing the power button until you hear “pair mode” and the LED light flashes red and blue. NOTE *Menus may vary by device. Select “PLT_BBFIT.” If necessary, enter four zeros (0000) for the passcode or accept the connection.
How do I reset my BackBeat headphones?
To reset your BackBeat GO/BackBeat GO 2: Press the volume up and volume down buttons at the same time. The light flashes rapidly 3 times, and then the headset turns off. When you turn on the headset, it automatically goes into pairing mode (flashing red and blue) so that you can pair it with your phone or other device.
How do you put a Plantronics BackBeat in pairing mode?
To pair your BackBeat FIT to your phone:
- Starting with your headset powered off, press and hold the power button until the LED flashes red and blue.
- Activate Bluetooth on your phone and set it to discover new devices. To do so:
- Tap PLT_BBT to complete the pairing.
How do I turn on my Plantronics headphones?
Press and hold the call control button then power the headset on and when the indicator light flashes red and blue, release the call control button. Once the headset is paired successfully the headset will flash blue. For the Plantronics Pulsar 590 & 590A & the Universal Adapter: Begin with the headset turned off.
How do I reset my Plantronics BackBeat?
To reset your BackBeat GO/BackBeat GO 2: Press the power button for about 5-6 seconds until the indicator light starts flashing red and blue. Press the volume up and volume down buttons at the same time. The light flashes rapidly 3 times, and then the headset turns off.
How do you use Plantronics Wireless headphones?
How do I turn up the volume on my Plantronics Bluetooth?
The “+” and “-“ volume control can be located on the body of the headset or inline control. To increase the volume, tap the “+” button and to decrease the volume tap the “-“ button, some products indicate the volume limit with a tone/voice alert.
How do I know if my Plantronics is charging?
It takes approximately 2 hours to fully charge your headset. While your headset is charging the indicator glows red. When your headset is fully charged, the indicator turns off.
Why is my Plantronics headset volume so low?
The reason is because your wireless headset is not set-up correctly. If your volume is low on your wireless headset, you will need to turn up the volume on the master volume control on the bottom of the wireless base.