How do you fix a Softub?
Contact your Softub dealer to have them send you a vinyl repair kit if you notice any leaks in the liner of your tub. To fix a hole in the liner you will need to drain the tub to access the tear in the liner. Once the liner is dry, apply the adhesive to the application wand and then apply the adhesive to the patch.
Is Softub still in business?
From humble beginnings in a small shop in Los Angeles, CA, Softub Spas is now a worldwide corporation with factories on both coasts and distribution in 50 states and more than 30 foreign countries.
How long does a Softub last?
It’s not leaking, but it’s obvious that it’s not going to last a lot longer. Based on my experience, these have a useful lifespan of about 10 years if you’re lucky. If you want a hut tub for the long haul, this isn’t it. On the positive side, it’s light weight, and easy to move.
Can you replace Softub liner?
A: Yes. The Softub can have its skin removed and replaced with another to make the unit look like new again. This should be performed by a certified technician, as the jets and drain holes will need to be cut out of the vinyl during the installation; one wrong cut would make the new liner leak.
How do you find a leak in a soft tub?
Wherever you see dark water appearing first should indicate the leak location. Another option is to let the water drop (without the spa running) and then pay close attention to where the water level drops and maintains its level. This will help you identify what level the leak is on and investigate from there.
Can soft tubs be used in the winter?
Softub is ideal for winter. Backed by an industry leading 5 year warranty and manufactured in Sudbury Ontario, it is the perfect way to take the bone chilling cold out of the season!
How do you clean the inside of a Softub?
Flush Your Plumbing Clean (recommended once per year)
- Remove filter cartridge.
- Pour 1/2 bottle into spa filled with hot water, run for 60 minutes without air on.
- Drain tub and rinse with clean water.
- Refill with new water.
Why is my Softub slimy?
Chemical imbalance If there is too much of some treatments or chemicals in your water, it can feel slimy and unpleasant to sit in. One particular thing to check is if you are using borates. While these are great as a pH buffer and can help your water feel softer, too much could lead to a slimy feel.
Why does my lazy spa keep deflating?
It may simply be that your tub’s inflation valve or deflation valve adapter is faulty, or that it’s too loose. A loose inflation valve is likely to be a key cause of air escaping through a Lay-Z-Spa. Once again, it can be uncommon for problems like this to arise in the most robust of tubs.
How do I make my Softub hotter?
How do the temperature controls work? Your Softub Spas® HydroMate® System is designed to be simple to operate and easy to maintain. To set the temperature, press the up or down arrow once to display the current setting. Then, use the up and down arrows to adjust the temperature to the setting you desire.
Why is my Softub water cloudy?
Water can be cloudy for several different reasons. Have you recently checked the water’s chlorine, pH and alkalinity levels to be sure these are balanced? If not then please do that first. Most often this problem can be solved by adding chlorine and keeping the pH properly balanced.
Why is my hot tub leaking from underneath?
It is most common to have leaks on the backside of spa jets, which can be caused by loose locknuts or deteriorated spa jet gaskets on the inside of the spa. Spa leaks occur in other gasketed spa or hot tub equipment, too — anything with o-rings and gaskets are susceptible.
How do you fix a deflated hot tub?
1) A leaky air-valve To do this you will need to deflate the hot tub, then holding the rear of the valve from inside the unit, turn clockwise with a wrench until tight. Re-inflate the tub then repeat the soapy water process to ensure it is no longer leaking- Job done!