How do you install a DITRA drain?
Schlüter-DITRA-DRAIN is cut to size, embedded in the applied adhesive and immediately pressed into the thin bed adhesive with a float or a roller. When working with Schlüter-DITRA-DRAIN 4, ensure that the inverted truncated pyramid shaped chambers are completely filled with adhesive after installation.
How does the Schluter drain work?
Schluter®-KERDI-DRAIN is a floor drain specifically designed to allow connections to Schluter-KERDI or other load bearing bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly.
How long should a linear drain be?
When the size of the area is standard, which is in most cases, you can use a standard linear drain. They are available in many sizes: 24”, 28”, 32”, 36”, 48”, 58”. Drains don’t need to run the full length of the wall, which allows you to use a standard length in most projects.
Can you use different drain with Schluter?
Can I use another manufacturer’s drain with your Schluter®-Shower System? The Schluter®-KERDI-DRAIN and Schluter®-KERDI-LINE drains are specifically designed to integrate with the Schluter®-Shower System. The Schluter®-Shower System 10-Year Limited Warranty is void if other drains are used.
Is a 1.5 drain OK for a shower?
Current plumbing codes (IPC as well as MA Plumbing Code 248 CMR 10 for instance) need 1.5 inches to drain for a tub with a shower. The tub can drain at leisure and the shower function when in utilize, with flow-limiting showerheads, fall within the flow rate that a 1.5” drain can handle.
What is Ditra used for in Schluter?
Schluter ® -DITRA and DITRA-XL are specifically designed for ceramic and stone tile installations. DITRA and DITRA-XL provide uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/OSB.
What is Schlüter-Ditra-drain 4?
Schlüter-DITRA-DRAIN 4 consists of an impact resistant polyethylene foil with a special stud structure on one side and polypropylene filter webbing laminated on the upper side. The compressive yield strength of Schlüter-DITRA-DRAIN 4 is up to 50 t/m2.
How to install Schlüter-Ditra-drain tile or natural stone covering?
Protective measures may also be required if the material is exposed to direct sunlight or precipitation in outdoor areas. 5.The tile or natural stone covering can immediately be installed after adhering Schlüter-DITRA-DRAIN. The covering materials must be fully embedded in the adhesive. Select the notch size of the trowel to match the tile format.
How to contact Schlüter®-Ditra-drain?
6.2 Schlüter®-DITRA-DRAIN Schlüter-Systems KG· Schmölestraße 7 · D-58640 Iserlohn · Tel.: +49 2371 971-261 · Fax: +49 2371 971-112 · www.schlueter-systems.com