How do I stop a part colliding in Solidworks?
Select Stop at collision to stop the motion of the component when it touches any other entity. The faces that touch the component you are moving are highlighted. The computer beeps when a collision is detected.
What is width mate in Solidworks?
A width mate constrains a tab between two planar faces. Width references can include: Two parallel planar faces. Two non-parallel planar faces (with or without draft)
What does lock mate do solidworks?
A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid.
What is the limit angle?
Angle Limit is used by the Adjacent and All Adjacent commands to set the bend angle within which entities should be considered adjacent. The default angle limit is the maximum of 180 degrees.
How do you lock all parts in a SolidWorks assembly?
Locking and Breaking External References
- In the FeatureManager design tree: For an individual item, right-click the feature, component, body, or part.
- Click External References.
- To modify external references, select the external references and click Break Selected, Lock Selected, or Unlock Selected.
- Click OK.
How does width Mate work?
The components align so that the tab is mated between the faces of the groove. The tab can translate along the center plane of the groove and rotate about an axis normal to the center plane. The width mate prevents the tab from translating or rotating side to side.
How do I turn off mates in SolidWorks?
Suppressing a Mate
- Right-click the mate in the FeatureManager design tree, and select Properties.
- Select Suppressed, and click OK. To unsuppress the mate, repeat the process, and clear the Suppressed check box.
How do you use limit angle mate?
To add a limit mate:
- Click Mate (Assembly toolbar) or Insert > Mate.
- Under Mate Selections, select the entities to mate for Entities to Mate .
- In the PropertyManager, under Advanced Mates: Click Distance or Angle .
- A LimitDistance or LimitAngle mate is added to the assembly.
How do I make my angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you delete an intersecting body in SolidWorks?
In the PropertyManager, click Intersect. The features you can remove appear in the Regions to Exclude list. Select Region 1, Region 3, and Region 5. The regions you select are not included as added geometry.
How do you lock a feature in SolidWorks?
Open the System Options, and on the General page check Enable Freeze bar. This adds the Freeze bar to the design tree in the Feature Manager. Drag the bar below the features you want to lock. Release your left mouse button, and the features are locked.
Can you lock SolidWorks files?
To lock files in SOLIDWORKS and DraftSight: In the Collaborative Sharing pane, hover over the file image, click the down arrow , and select Lock.
What is mating in Solidworks?
Mates are constraints that hold components together in SOLIDWORKS assemblies. Like relations in sketches, they are geometric conditions relating one entity to another. Each Mate requires you to select two (or more) faces, edges, or vertices on separate parts to build a constraint holding those parts together.