What does wet location listed mean?
Only lighting and fans marked “Suitable for Wet Locations” can be used in wet locations, both indoors and outdoors. A wet location is an interior or exterior location in which water or other liquids may drip, splash or flow on or against the electrical components of a lighting fixture or ceiling fan.
What does wet Rated mean?
Wet rating refers to locations where your wet rated outdoor lighting fixture might encounter dripping water, rain, or other liquid that could flow or splash on or against your LED bulb or LED light fixture. When a light will come into contact with rain or snow outside, you want wet rated LEDs placed there.
What does suitable for damp locations mean?
UL Listed for Damp Locations Luminaires that are “Suitable for Damp Locations” are approved for areas that are regularly exposed to moisture and condensation. These fixtures can safely handle limited amounts of moisture on, in, and around their electrical components.
What does safety rating damp mean?
What are Damp-Rated Lights? Damp-rated lights are designed to withstand moist environments, specifically those where condensation may build up in and around the fixture. Damp-rated lights can go both outdoors and indoors. They withstand moisture but not direct contact with the elements.
Is a bathroom considered a damp location?
Bathrooms are considered damp rated. Due to the water (hot or cold) that’s generated from the sink and shower, there’s a chance for humidity to rest upon the bulb. Damp-rated areas include indoor pools, bathrooms, and light fixtures near the kitchen sink/stove.
Is a parking garage a damp location?
I would classify a parking deck as a damp location. Where the lights are going to be installed is a parking garage, however there is a parking deck above the garage.
What is the difference between damp and wet locations?
Damp-rated lights are used in places that have some contact with moisture, but not in areas with constant or direct exposure to water. These lights do not have the same full seals as lights made for wet environments, but they’re used in many situations around the home.
What IP rating is wet location?
For applications in or near water, there are three ratings that you need to look for: IP68 is for full, permanent submersion in water up to 13 feet. IP67 is for temporary submersion in up to 3 feet of water for no longer than 30 minutes. IP65 protects against water jets at any angle.
Is a shower considered a wet location?
Indoor locations like showers are also considered wet locations. If an area can have water splash or flow with direct contact to a light fixture, then it is considered a wet location. Most of Dutton Brown Design’s light fixtures are UL Listed for dry locations.
Is a bathroom a wet or damp location?
Is a parking garage a wet location?
I would classify a parking deck as a damp location.
Is a basement a damp location?
Location, Damp. Examples of such locations include partially protected locations under canopies, marquees, roofed open porches, and like locations, and interior locations subject to moderate degrees of moisture, such as some basements, some barns, and some coldstorage warehouses.
What does IP wet mean?
IP stands for Ingress Protection. Basically, this is a way of being more specific than saying “water resistant” when describing the degree of protection against intrusion into a fixture by foreign bodies. Foreign bodies can be anything from fingers and toes, to dust, and even can include water or other liquids.
What does IP Code wet mean?
IP68 Waterproof is the highest degree of protection from liquids. Products with an IP68 rating are waterproof and can be fully protected submerged in water up to 3 meters, permanently. Although an LED light bulb with an IP65 rating can be used in heavy rains, it is not suitable to be fully submerged in water.
Is a kitchen considered a damp location?
Rooms that boast atmospheres may warrant a damp rating, such as a bathroom or kitchen space. According to home electrical, anywhere with light fixtures exposed to water, rain, or heavy storms will often have a wet rating.
Is a basement a wet location?
Damp Location However, the semi-outdoor nature of the space means it is exposed to condensation and humidity. Porches are the most common areas considered damp. Indoor spaces such as unfinished basements and saunas are often considered damp locations.
What is IP52 protection?
IP52 Protected from limited dust ingress. Protected from water spray less than 15 degrees from vertical. IP53 Protected from limited dust ingress. Protected from water spray less than 60 degrees from vertical.
Is IP52 OK for rain?
Select an IP rating from the checker and display the definition for the ingress protection it will provide or look up an IP rating from the table for an explanation….IP Rating Look-up Table.
Rating | Protection from Solids | Protection from Liquids |
---|---|---|
IP52 | Limited dust ingress protection | water spray < 15 degrees from vertical |