How can I make my TP-Link router an access point?

How to change a TP-Link router to AP mode

Table of Contents

Connect a computer to the TP-Link router and launch a web browser.
Visit the following router configuration page: 192.168.1.1.
You are prompted to enter a username and password.
Click the Mode button on the upper-right corner, select Access Point and click Save.

What is access point mode in TP-Link router?

Under the AP mode, the Guest Network will not be separate from the main network. Clients connected to the guest network can access to the main network. Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

How do I turn my tp-link router into a repeater?

Connect the WR702N directly to your computer’s Ethernet port by an Ethernet cable;

Power on the WR702N.
Click OK to exit.
Open a Web Browser -> Type 192.168.0.254 in the address bar -> Press Enter.
Enter the default Password: admin.
Go to Quick Setup-> Click Next.
Select Repeater-> Click Next.
Click Survey.

What is secondary connection in TP-Link Router?

Using TP-Link router when establishing connection through PPPoE a secondary address entry is made in TP-Link router (Secondary address is DHCP IP assigned to device connected to LAN) and WAN address is allotted to access internet. Keep in mind both of these address are of different networks.

What type of access control does the tl-wr740n router provide?

The TL-WR740N Wireless Lite N Router provides flexible access control, so that parents or network administrators can establish restricted access policies for children or staff.

How to set up WDS bridging on wr740n?

Following are the basic steps that you need to take to set up one: Go to wireless settings page of your WR740N router’s web interface, enable the option “Enable WDS Bridging” and click Survey. Your bridge router will show you routers to bridge with.

How to set up a wr740n as a repeater?

You can set a WR740N as a repeater according to the instructions given by other users before me but you also have to go to the main router and make it aware (there is a special setting that depends of your main router connected directly to the internet) your WR740N exists.

How to fix TP-Link wireless router won’t turn on?

First of all, please check whether your TP-Link router has Operation Mode option on the left side menu. You may login the web interface of TP-Link wireless router to figure it out by referring to How do I log into the web-based Utility (Management Page) of TP-Link wireless router? Case 1.