What is Ford SecuriLock pass anti-theft?
What Is Ford SecuriLock® Passive Anti-Theft System (PATS)? SecuriLock is an engine immobilization system. It helps to prevent anyone from starting the engine without using a coded key programmed to your vehicle. Using the wrong key could prevent the engine from starting.
Can I remove PATS system?
Yes, it is possible to disable the PATS system on a Ford vehicle. That said, this will require a professional to turn off your car’s anti-theft system, which should only cost you around $200.
How do I get my Ford out of anti-theft mode?
Key
- Insert the key into the driver’s side door lock.
- Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds.
- Do this again, but turn the key in the opposite direction.
- Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
What year did Ford start using PATS system?
1996
Passive Anti-Theft Systems (PATS), also called Ford Securilock, is a vehicle security feature introduced on 1996 and later Ford vehicles.
How do you bypass the Ford PATS system?
The procedure to permanently bypass the PATS system is fairly simple:
- Disassemble the ignition key grip to get to the RFID chip.
- Carefully remove the chip from its housing, then reassemble the key.
- Use a piece of tape to temporarily secure the RFID chip close to the ignition lock.
How do I disable SecuriLock passive anti-theft system?
Resetting your anti-theft system is as easy as turning your key in the ignition eight times in 10 seconds, leaving the last turn in the “run” position. Then, press and hold a button on the remote for 30 seconds to lock the vehicle.
Can you bypass Ford Pats?
Although Ford’s PATS system cannot be bypassed without the ignition key, there are a couple of ways you can get around it once you’ve got the proper RFID chip. By taking the chip out of the key and gluing it to the ignition lock, the PATS system will always register the correct code and let you start the vehicle.
How do I reset my SecuriLock?
How do I reset my Securilock passive anti-theft system? Resetting your anti-theft system is as easy as turning your key in the ignition eight times in 10 seconds, leaving the last turn in the “run” position. Then, press and hold a button on the remote for 30 seconds to lock the vehicle.
How do I reprogram my Ford Pats?
Cycle an unprogrammed key in ignition to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Program.” Disconnect Tool and leave key in RUN for 20 seconds. 1 key required.
How do I disable Ford Securilock?
Switching Between Turning On/Off Ford’s Automatic Lock Press on the door unlock button. Then, press the lock button. You will hear the horn sound one time to indicate that you have turned off your automatic locking feature. If it honks twice, your auto-lock feature has been turned back on.