What temp should i7 4790K run at?
The idle temperature is around 25°C regarding the Intel tool. Room temperature should be around 19°C.
Does the i7 4790k support DDR4?
The i7-4790K works with Z97 based motherboards and uses DDR3 not DDR4. If you want to use DDR4, you only have two choices. One is to use a Haswell-E CPU (i7-5820K, i7-5930K, i7-5960X) and an X99 based motherboard.
How old is the i7 4790k?
The Intel Core i7-4790K is a desktop processor with 4 cores, launched in May 2014. It is part of the Core i7 lineup, using the Haswell architecture with Socket 1150.
Is 75c hot for gaming?
That’s still within a healthy temperature range. Under full load you don’t want the CPU to reach over 80 celsius, so you’re getting warm but still within healthy operating temperatures.
Is 70 degrees Celsius hot for a CPU while gaming?
If you are hovering around 70 to 80 degrees Celsius, some would say that it is generally safe. While it is a little bit safe, it is already near the danger levels of overheating as going close to 90 degrees while gaming can get your CPU damaged over time.
How hot does the i7 4790k get?
That said performance should be about the same as the stock cooler so temps will be about 70-80c when the CPU is at 100% load. The 4790k has a TDP of 88w, 4w higher than the 4690 (non k) and I expect the i7 would possibly run slightly hotter than the i5 also due to hyperthreading.
What should the CPU temperature be at idle?
The idle temperature is around 25°C regarding the Intel tool. Room temperature should be around 19°C. 12-16-2014 01:27 AM Since yesterday I have a new CPU (RMA). I’ve done some (short) tests with Prime95 small FFT’s and I can confirm that based on these tests, the max temperature seems to be 10°C – 15°C lower.
How hot do the FFTs run?
The In-Place Large FFTs and Blend in Prime95 run about 40 degrees above ambient (70 degrees). Using the Small FFTs results in instant >100 temperatures and the computer will eventually restart.
What happens if you remove the heatspreader from a 4790k?
Using the Small FFTs results in instant >100 temperatures and the computer will eventually restart. I had read recently that someone removed the heatspreader from their 4790K and found cooling afterwards substantially better, which supports the idea that there’s terrible heat conductivity between the top of the die and heat-spreader.