Menu Close

How do I connect my TP-Link TL WA701ND?

Admin

How do I connect my TP-Link TL WA701ND?

Note：

  1. Note：
  2. Here we take TL-WA701ND V2 and the information below as a reference.
  3. Connect the computer to the AP with an Ethernet cable.
  4. Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.
  5. You will log into the TP-Link Quick Setup page.

How do I reset my TP-Link TL WA701ND?

Turn on the TP-LINK WA701ND, wait 1 minute and press the reset button located on the back of your equipment for 10 seconds. On your desktop, open a DOS prompt and try to ping the default IP address of the TP-LINK equipment.

How do I connect my tp link wifi extender to my router without WPS?

Locate the Ethernet cable running from your router to your PC, and unplug the end connected to your PC. Then, plug it directly into the range extender. This will establish an Ethernet connection from the range extender to the PC.

How do I connect my TP Link TL WA901ND?

Open the web browser and type the IP address of the access point (Default is 192.168….How to configure TL-WA701ND V2, TL-WA801ND V2, TL-WA901ND V3 or TL-WA7210N as a repeater?

  1. LAN IP: 192.168. 0.1.
  2. SSID: test ABC.
  3. Encryption Type: WPA2-PSK.
  4. Passphrase: 11667063.

How do I reset my TL wa801n?

Reset the access point to its factory default settings: use a pin to press and hold the Reset button until the Power LED starts blinking, then release the button.

How do I setup my tp link extender without a computer?

How to configure my Range Extender via WPS button to extend an existing wireless network’s coverage

  1. Plug your Range Extender into a power outlet near your main Router/AP.
  2. Push the WPS button on your main Router/AP first, then immediately push the WPS button on your Range Extender.
  3. The WPS process will last 2 minutes.

How do I setup my TP-LINK router without Ethernet cable?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I connect my tp-link router to my phone?

How to use Tether to setup your TP-Link Router

  1. Step 1: Go to your smartphone’s wireless settings and connect to your router’s wireless network.
  2. Step 2: Open the Tether App.
  3. Step 3: Tap on your router Icon under Local Devices.
  4. Step 4: You may be prompted to log in or change the password.