What is ESP in Cisco router?
Extended Services Processor. The ESP header is designed to provide a mix of security services in IPv4 and IPv6. ESP may be applied alone, in combination with AH, or in a nested fashion.
What is ASR router?
ASR stands for Aggregation Services Router. Routers in this series are used primarily for edge routing. They are ideal for high bandwidth applications, such as streaming audio or video, or video conferencing. The ASR 9000 Series has core routing capabilities as well. The ASR routers can all handle up to 100 G Ethernet.
What port is ESP?
Encapsulated Security Protocol (ESP): IP Protocol 50; UDP port 4500.
What is ISR gateway?
An IP router, ISR router, or network router, is a networking device that forwards information between digital networks. The acronym “ISR” stands for integrated service router. The acronym “IP” stands for Internet Protocol, the de facto standard for modern network communication.
What is ESP mode?
Electronic Stability Programme (ESP) is a computerized safety technology present in most modern cars. It is designed to improve a vehicle’s stability by detecting and reducing loss of traction, thus preventing the tyres from skidding uncontrollably.
What are Cisco ASR 1000 series embedded services processors?
The Cisco ® ASR 1000 Series Embedded Services Processors (ESPs) handle all the network data-plane traffic processing tasks of Cisco ASR 1000 Series Aggregation Services Routers.
Is the ESP module integrated in the Cisco ASR 1002-x chassis?
The ESP module is integrated in the Cisco ASR 1002-X chassis. Refer to Cisco IOS XE Software Release 3.7.0S (or later) protocol support Refer to Cisco ASR 1000 Series SIP data sheet for SPA support. The SIP is integrated in the Cisco ASR 1002-X chassis 1-GB Cisco FP Resource Memory, 40-Mb TCAM, and 512-MB packet buffet memory.
What is an ESP in networking?
These ESPs allow the activation of concurrent enhanced network services, such as cryptography, firewall, Network Address Translation (NAT), Quality of Service (QoS), NetFlow, and many others while maintaining line speeds. Figure 1 shows the Cisco ASR 1000 Series ESP 100 and ESP 200.
What is the operating altitude of the Cisco ASR 1002-x?
Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) Table 16. Specifications of Integrated ESP module in Cisco ASR 1002-X chassis The ESP module is integrated in the Cisco ASR 1002-X chassis. Refer to Cisco IOS XE Software Release 3.7.0S (or later) protocol support