Menu Close

How do you use Colron wood dye?

How do you use Colron wood dye?

Colour Wood with Dye

  1. Test for colour on matching cut off of wood, or an inconspicuous area.
  2. Apply to clean, smooth bare wood surface, rubbing the Colron Refined Wood Dye along the grain with a dry lint free cloth.
  3. Allow to dry for 6 hours before applying a finish.
  4. Overcoat with Ronseal Varnish for ultimate protection.

Can you mix Colron wood dye?

Are the Colron Refined Wood Dye colours inter-mixable? Yes, be sure to shake the dye thoroughly before and after mixing. Always mix enough dye to complete the job.

Is Colron wood dye waterproof?

Natural oils and resins that feed the wood to provide a natural waterproof finish. A blend of natural waxes for use on untreated or bare interior wood surfaces. Creates a beautiful natural lustre. Covers scratches on all wood surfaces including waxed, polished and cellulose finishes.

How do you remove Colron dye from wood?


  1. Brush on the Colron Furniture Stripper and leave for 5 – 15 minutes until it has penetrated the old surface.
  2. Remove the finish with Colron Coarse Steel Wool (00), rubbing along the grain.
  3. Repeat steps 1 and 2 until the old finish has been removed.

Can you varnish over Colron wood dye?

Finish Type Colron refined wood dye can be finished with an alternative interior wood oil, clear wax or wood varnish from other brands.

How do you apply wood dye?

There are a number of methods you can use:

  1. Brush-on method. Dip a foam or bristle brush or old cloth in the dye and spread it evenly over your wood surface.
  2. Immersion method. Place the wood gently into the prepared dye.
  3. Weather-beaten look. Chose two dye colors to apply one after the other.

How do you use Colron wood reviver?

Apply a thin coating Of Colron Wood Reviver with a clean, soft cloth, rubbing the liquid well into the grain, leaving none on the surface. Very old, dry or weathered wood may require a more generous application. Allow to dry for 24 hours before applying a finish. Allow 24 hours before applying a finish.

Is Colron wood dye oil based?

Colron Refined Wood Dye is a water based acrylic dye designed to highlight the natural beauty of wood.

How does wood reviver work?

Wood Reviver is a water-based formulation containing oxalic acid, a biodegradable organic acid found naturally in plants such as rhubarb and spinach. It will turn back the clock, restoring grey, UV-damaged wood to its original warm tones.

Is Colron wood dye oil-based?

Can you wax over Colron wood dye?

Can I apply wax or oil over a dye? Yes you can apply a clear wax over for protection, but not an oil.

How do you use Osmo wood Reviver?

Method of Application Generously apply the gel along the wood grain. After approx. 20 minutes reaction time, clean surface with Osmo Decking Cleaning Brush and rinse with plenty of water.

Does waxing wood waterproof it?

Wax is great for drawing out the natural features of your wood, highlighting all the knots and bumps and colouring that makes your wood unique. Wax is waterproof, so it’s perfect for coffee tables and other pieces of furniture that see a lot of wear and tear.

What does wood reviver do?

A powerful wood cleaner that renovates badly weathered exterior wood. Wood Reviver effectively removes blackening and greening of wood due to fungal and algae growth and greying from exposure to the sun.

What are the disadvantages of wood wax?

Disadvantages of wax finishes on wood

  • Difficult to remove. Although wax is easy to apply to a floor, it is pretty difficult to remove.
  • Natural wax finishes are not as persistent as Polyurethane.
  • Wax is not suitable for all types of flooring.
  • You need to apply it by hand.