Menu Close

How tall should jack stands be?

How tall should jack stands be?

Most standard jack stands typically adjust from a height of 10 inches in their lowest position to 17 inches fully extended.

What sizes do jack stands come in?

In short:

  • Buy 2-ton (4,000-pound) jack stands only if you have a small light vehicle.
  • Buy 3-ton (6,000-pound) jack stands for a medium to large vehicle or a medium SUV.
  • Buy 5- or 6-ton (10,000 or 12,000-pound) jack stands if you will be routinely working on a truck or large SUV.

Can you lift a car on 4 jack stands?

Lift your car with a quality jack. If lifting just one end of your car, you’ll need two jack stands. If you’re lifting the entire car, use four jack stands. On soft earth, such as asphalt or grass, thick plywood can prevent them from sinking.

Is a 2 ton jack stand enough for a truck?

For most sedans and small cars, a two-ton jack will be sufficient for raising a corner. A pickup truck or SUV could require twice that rating (four tons) to give you the margin of safety that you need.

How tall should a jack be to lift a truck?

Q. What kind of floor jack is needed for a truck? Most jack styles will work; just be sure that it has a minimum weight capacity of 3 tons or 6,000 pounds and a minimum lifting height of 16 inches.

Is it OK to leave car on Jackstands overnight?

It may be safe for your car, but it isn’t safe for asphalt. Once I did this in an apartment parking lot and with the hot sun bearing down, the jacks melted about a half inch into the tar. It was only for about a day, actually.

How tall of a jack do I need for my truck?

Q: What kind of floor jack is needed for a truck? Most jack styles will work; just be sure that it has a minimum weight capacity of 3 tons or 6,000 pounds and a minimum lifting height of 16 inches.

What can you use instead of jack stands?

Jack Stand Alternatives

  • Mini ramps: Like jack stands, mini ramps are inexpensive.
  • A commercial grade 2 post or 4 post lift: If you’re going to buy a 2 post or 4 post lift, commercial grade is the way to go.
  • The Kwik-Lift: Last, but certainly not least, there’s the Kwik-Lift.

Will 2 ton jack stands hold my truck?

It’s important to understand that you won’t be lifting your entire automobile with a single jack, so you don’t need one that’s rated for the whole weight of your car or truck. For most sedans and small cars, a two-ton jack will be sufficient for raising a corner.