Does the height of the refrigerator include the hinge?
Measure the New Refrigerator To measure the height, extend the tape measure from the floor to the top of the door hinges. (Most listed dimensions don’t include the hinges, which can add another inch to the overall height.)
What is refrigerator height to top of case?
Standard refrigerator height ranges from 66 to 70 inches tall, with French Door and side-by-side models measuring on the taller ends. Counter-depth refrigerators will also likely measure a few inches taller than standard refrigerators.
Can a fridge be flush against a wall?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient.
How much space should you leave between fridge and wall?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
How close to the wall should a refrigerator be?
Side Clearance – Plan for between one-half inch to one-inch of clearance on both sides of the unit. Rear Clearance – Allow between one to two inches of space at the rear of the refrigerator for proper airflow. Top Clearance – Ensure there is a minimum of one-half inch to one-inch of clearance on top of the unit.
How much clearance does a French door refrigerator need?
3.75″
Standard-depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter-depth refrigerators that sit flush with cabinetry. 3 Allow 3.75″ of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.
What are the standard refrigerator sizes?
Standard refrigerators range in size from 24 to 40 inches wide, 62 to 72 inches tall, and 29 to 36 inches deep. Typically, french door refrigerators and side-by-side refrigerators are larger in width and height. Counter-depth refrigerators are also available too. Top and bottom-freezer refrigerators are often available in smaller sizes.
How much space should be between the hinge side of refrigerator?
If there’s not about 2-inches of space on the hinge side, then you’ll have to keep in mind that the refrigerator will need to be pulled out about 2-inches to make up for this. Refrigerators need to breathe. If they are entirely boxed in, then there’s not much room for ventilation.
How do you measure the size of a refrigerator?
Measuring Refrigerator Depth, Width and Height. When you measure the space for a new refrigerator, make sure to take several measurements. From top to bottom, left to right, front to back, it’s worth measuring a couple of times for accuracy.
How to choose the right refrigerator for your kitchen?
First, determine the proper refrigerator height for your kitchen. To do this, measure the space from the floor to the top of the ceiling. This will give you the maximum height of the refrigerator you can get.