What is the purpose of checkered plate?
Checker plate is also called diamond plate or tread plate. It has a raised surface, which provide excellent anti-slip function. Benefit from this advantage, the checker plate is commonly used in the factory, industry and workshop for the anti-slip floorings, floor treads or platforms.
What is the difference between diamond plate and checkered plate?
What is the Difference Between Diamond Plate, Tread Plate and Checker Plate? There is really no difference between diamond plate, tread plate, and checker plate other than the name. For the most part, these names can be used interchangeably. All three names refer to the same shape of metal material.
What sizes does checker plate come in?
Checker steel plate thickness 10 mm, length 1.35 m, width 0.9 m. Plate steel floor rolled checkered size: length 2500 mm × width 1250 mm × thickness 6 mm. MS checker plate with size: 9 mm – 12 mm thickness × 1524 mm × 3048 mm. Checkered plate in sheet thickness 2, 2.5, 4.0, 6.0 mm and size 1220 × 2440 mm.
What is checker plate made of?
Diamond plate, also referred to as checker plate or tread plate, is a type of metal typically made from either aluminum or steel. It’s called diamond plate due to the raised, diamond-shaped lines that criss-cross at 90-degree angles. There are two ways for diamond plate aluminum to be made. Stamped.
Is checker plate magnetic?
Rolled steel checker plate (as rolled, not galvanized) with thickness 2 mm – 9 mm. 304 stainless steel checker plate (this material is non magnetic) 1250 mm × 2500 mm × 2.5 mm.
Can you roll checker plate?
The checker plate is also quite malleable and can be bent or rolled to suit many different needs.
What size are Aluminium checker plates?
Aluminium Sheet 4 x 1200 x 2400 Aluminium Tread Plate (or Checker Plate) is a smooth sheet with a regular diamond pattern on one side.
Are Aluminium checker plates heat resistant?
The metal components of a chequer plate sheet make it highly resistant to heat, dust, corrosion and chemicals. Therefore, you can install it in treatment plants, oil production platforms and chemical workshops.
What is checker plate made from?
What is the material of checker plate?
Diamond plate, also known as checker plate and tread plate, is a type of metal stock with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually steel, stainless steel or aluminum.
How are Chequered plates calculated?
To calculate the volume of an MS chequered plate, multiply its thickness in cms x width in cms x length in cms (t x w x l) to get the volume in cms of the chequered plate. Thus, V = twl cubic centimeters, multiply the volume with a density of the plate. You will get the weight of the chequered plate in gms.
How is Chequered thickness calculated?
Chequered plate thickness is measured excluding the chequeres. That is to say 6mm thick chequred plate means 6 thick plate with chequres above it. Hence the weight of chequred plate comes higher as compared to plain plates. Weight of chequeres are approximately 6.1 kg/m² over and above the plate weight.