What is Zinsser BIN primer used for?
Zinsser® B-I-N® Shellac-Base Primer is a primer-sealer/stain killer/bond coat recommended for application to interior ceilings, walls, doors, trim, cabinets, furniture and related paintable surfaces. Exterior uses are limited to spot priming only.
What kind of paint do you use on bin primer?
Any oil or latex paint can be applied over it. Professionals love B-I-N because it dries faster than any other primer. It cures as fast as it dries, making it ideal for kitchen cabinet repainting, doors, and trim work.
What does bin mean in Zinsser?
B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on inte.. MORE. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains.
Do I need to undercoat after Zinsser BIN?
Agree with what’s been said the BIN is your primer/undercoat you need to stir really well, use 2 coats if necessary allowing time to dry between coats, then put your top coat on, probably 2 coats. You should never mix oil and water products, it’s the oil based undercoat that is your problem, you didn’t need it.
Do you sand after using bin primer?
Answer: Yes, but the paint will form a stronger bond scuff sanding the primer before painting. If you’re able to sand the ceiling without damaging the texture, scuff sand it with a drywall sanding sponge. If you don’t sand the primer, the paint’s not going to peel off the ceiling.
Does Zinsser primer need a top coat?
Primer is not formulated to stand up to the elements and should be topcoated within several weeks to ensure proper bonding. If left uncovered for an extended period of time, primer will tend to deteriorate and chalk, which could prevent future coats of paint from adhering properly.
How long before you can paint over bin primer?
BIN dries really fast with the windows open. You can paint over the primer in 45 min to 1 hour.
Is one coat of Zinsser enough?
As long as the primer applies uniformly over the previous color, then one or two coats should be sufficient. Again, it is not necessary to apply several coats of primer to try to get a perfect white finish. That is the job of the topcoat (paint) which has to be applied on top of the primer.
How long should Zinsser BIN primer dry before painting?
Dry Time – At normal temperatures Bulls Eye® 1-2-3 will dry to touch in 30 minutes and can be recoated after one hour. Topcoat within 30 days. Lower temperatures, higher humidity, and the addition of tint will prolong dry and cure time of the product. Full adhesion and hardness develop in 7 days.
Do I need undercoat after Zinsser BIN?
How long after Zinsser primer can I paint?
Dries to touch in 5 minutes and can be topcoated in 30 minutes with latex or oil-based paints. For best results, allow primer to cure overnight before applying strong solvent- based topcoats. Wipe off tip before storing. Clean-up wet paint with xylene or mineral spirits.
Does Zinsser primer need two coats?
Depending on how strong or bold the previous color is, it may be necessary to apply more than one coat of primer. However, it is not necessary to over apply the primer with so many coats. As long as the primer applies uniformly over the previous color, then one or two coats should be sufficient.
Is Zinsser 123 a good primer?
It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding.
Do you have to sand after bin primer?
Do you need to sand between coats of Zinsser BIN?
Bin’s is very sandable and should be sanded between coats. When you apply it, work fast, get it on as even as you can, but do not try to over work it. It flashes fast and trying to overbrush partially dried bin’s will cause it to curl and drag.
Can you paint over gloss with Zinsser BIN?
Painting glossy, impermeable surfaces requires a primer with exceptional adhesion. Zinsser’s B-I-N® Primer Sealer is exactly that!
Is Zinsser BIN primer oil or water based?
Zinsser Bulls Eye 1-2-3 5 gal. Water Based White Primer and Sealer provide excellent adhesion to glossy surfaces without sanding. It’s great for interior and exterior surfaces. Outstanding low VOC and low odor formula is designed to resist blistering, peeling and mold and mildew growth.
What is drywall primer?
Drywall primer is a PVA primer (Polyvinyl Acrylic) that seals the pores in new drywall and creates an even surface for new paint. Drywall primer allows you to apply fewer topcoats and helps your topcoat look even and true. How Many Coats of Primer on New Drywall. New drywall only requires one coat of drywall primer.
What kind of primer is bin?
shellac-based
B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains.
Do you need to sand after Zinsser primer?
Answer: The cabinets should be cleaned and sanded to remove the glossy clear coat. This allows the primer to bond stronger to the surface. Use an electric sander with 150-grit sandpaper. You can brush and roll BIN, but it’s messy to work with because it’s as thin as water.
Which Zinsser primer should I use?
Summing up: All three Zinsser primers are very high quality, you just need to know which one to use for which application. Zinsser 123 is great for surfaces that are easier to adhere to and has low odor. Zinsser Cover Stain provides durability and adhesion on glossy glossy surfaces.
Can you use water-based paint over Zinsser BIN Primer?
B-I-N®, developed in 1946, is the original shellac-based white-pigmented primer-sealer stain-killer. Great for use on all interior surfaces & spot priming on exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work. Any oil or latex paint can be applied over it.
Is there a difference between drywall primer and regular primer?
Untreated drywall is porous and absorbs paint; priming provides a smooth surface for the paint to adhere to, according to Bob Vila. PVA primer covers seams, imperfections and sanded areas on the surface of the drywall. Typically, a wall that’s been primed first requires fewer coats of paint.
Can you use water based paint over Zinsser BIN Primer?