What does DTM mean on paint?

direct-to-metal
The Ultra Spec direct-to-metal (DTM) paint is a great choice for general contractors. Developed to protect metal from rusting, it is 100% acrylic, meaning it is water-resistant when dry. It can be used on both interior and exterior surfaces, and includes a primer and two finishes.

Table of Contents

Does DTM paint come in flat?

Flat or matte sheen provides great depth of color and is ideal for less-than-perfect surfaces. Eggshell, pearl and satin sheens are light, easy to clean, work great in high traffic areas, and reveal color with a softly polished glow.

Does DTM paint need primer?

Does DTM paint need a primer? To elaborate on a characteristic of DTM paint that gives the coating its name, this type of paint does not require a primer. DTM is formulated to be applied with minimal surface preparation and acts as a primer/topcoat combination.

Does Benjamin Moore make acrylic paint?

ben® Interior User-friendly acrylic paint offering a durable and washable finish. Easy application and great touch up.

What is DTM acrylic coating used for?

Pro Industrial DTM Acrylic coating is an interior-exterior, water based, corrosion resistant acrylic coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates.

Can you roll on DTM paint?

DTM Acrylic Coating This high-performance product offers excellent weathering properties, moisture resistance, corrosion and flash rust resistance. It’s resistant to stains and to most commercial cleaners, and is easy to apply by brush, roll or spray.

What is low Lustre paint?

Low Lustre paints have a higher gloss level than flat and matte paints. Low Lustre paints are excellent for areas that require some gloss, but also require good cleaning properties and resistance to moisture. Low Lustre paints tend to be used in exterior coatings and are best suited for siding and masonry surfaces.

What do you thin DTM paint with?

For airless spray application, thin material up to 10% with clean water. Do not apply DTM Acrylic Finishes if rain is threatening. If heavy night dew is forecast, stop painting at least 6 hours before dew point is achieved. DTM Acrylics will dry to the touch in 30 minutes and may be re-coated in 2 hours.

What are the different grades of Benjamin Moore paint?

Benjamin Moore produces four main quality levels of its interior paints. In order of ascending quality levels, they are: Super Hide, Super Spec, Regal and Aura.

How do you clean DTM acrylic paint?

Do not use hydrocarbon solvents for cleaning. Minimum surface preparation is Hand Tool Clean per SSPC-SP2. Remove all oil and grease from surface per SSPC-SP1. For better performance, use Commercial Blast Cleaning per SSPC-SP6.

How do you apply acrylic DTM coating?

Scrape off large rust spots with a wire brush.
Scrub off smaller rust deposits with a scouring pad.
Wash the surface with soap, water and a rag.
Lay plastic sheets and painter’s tape over nearby items.
Spray DTM paint onto the surface with an airless spray gun.

Is DTM paint oil based?

Rust-Oleum® Professional DTM Alkyd Enamels are oil- modified alkyds with excellent rust prevention when applied directly to metal. They also offer excellent coverage, chip resistance and color retention.

Is low lustre paint shiny?

Low Sheen. Low sheen paints are similar to eggshell paints, but have a slightly higher gloss. They are a good choice for areas where some gloss is desired, but good cleaning properties are also necessary, such as, kitchens, laundry rooms and bathrooms.

Is Benjamin Moore low lustre the same as satin?

∎ low lustre is a lightly reflective and smooth sheen that offers a rich appearance. ∎ satin is a very versatile finish, giving you a subtle shine that can be used anywhere.

Which grade of Benjamin Moore paint is best?

In order of ascending quality levels, they are: Super Hide, Super Spec, Regal and Aura. The labels of all four say “Benjamin Moore” but they are also clearly labeled with the product name so with this information you’ll be able to ensure you get the right product. Super Hide is the bottom of the line.

What is DTM acrylic?

DTM Acrylic coATing is a 100% acrylic, water reducible, corro- sion resistant coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates.

What is DTM acrylic coating?

Is Benjamin Moore low Lustre the same as satin?

Is low Lustre the same as matte?

Is low Lustre the same as semi-gloss?

Low Lustre paints tend to be used in exterior coatings and are best suited for siding and masonry surfaces. Soft Gloss paints have a slightly duller sheen level than semi-gloss paints, and offer superior resistance to stains and dirt.