How do I add a lock to Kevo?
Launch the Kevo app and click on the menu button in the upper left corner of your screen. 3. Select “Set Up a Lock”. Once you have read the page displayed, click on the “Get Started” button at the bottom of your screen.
Why does my Kevo keeps unlocking?
The turnpiece may not be turned to its full limit. This causes Kevo to think that it is still in its previous state. Make sure to turn the turnpiece or mechanical key to their full limit when using them.
What is Kevo Plus Gateway?
The Kevo Plus Gateway uses an Ethernet connection to connect to your home wireless router and then uses your high speed internet service to communicate with our cloud.
Does the Kwikset aura lock automatically?
Yes, the auto-lock time delay can be customized using the Kwikset App within Bluetooth range Aura. The selectable time intervals are: 30 seconds, 1 minute, 3 minutes, 5 minutes, 10 minutes.
Why is my Kwikset lock jamming?
The hole in the door is misaligned. The deadbolt latch and strike are misaligned, causing the latch to bind. The lower latch and lower strike (for your knob or lever) are misaligned, putting too much load on the deadbolt latch. The hole in the door frame for the latch bolt is not drilled deep enough.
How do I calibrate my Kevo lock?
How do I re-calibrate the Kevo Smart Lock, 2nd Gen without deleting the App or resetting the Smart Lock? Open up the interior casing of the lock, press and release the calibration button (Indicated as Button ‘B’) to reset and the lock’s learning algorithm will auto calibrate after the first 10 locks and unlock cycles.
Is Kevo plus Z Wave?
Kwikset’s Kevo Bluetooth (BLE) smart locks for doors can finally integrate with home automation systems thanks to a new Home Connect Bridge that translates ZigBee and Z-Wave commands into Bluetooth for controlling the lock.
Why is my Kwikset lock not syncing?
Two possible issues: The lock was not removed completely from another network before being paired with the new network. Follow your smart home system’s instructions to remove (exclude/unpair) the device from any other network. Then, attempt to pair (add/include) the lock again.
What is auto-lock on Kwikset?
The Auto-Lock feature automatically re-locks your door. 30 seconds after unlocking. This feature is off by default. 1. Make sure the lock is unlocked and the door is open.
What is autolock Kwikset Halo?
Auto-lock is an optional re-locking feature whereby the Halo deadbolt re-locks itself after a selectable time delay after it’s been unlocked.