What is an adaptive phase dimmer?
The phase-adaptive dimmer controls a wide variety of bulbs by automatically sensing the load type and adjusting to provide the best performance. Because of the dimmer’s flexibility, you’ll be able to change your lamp without changing your dimmer.
How many loads can be controlled through a Control4 Dimmer module?
The Control4® 8-Channel Dimmer controls up to eight (8) loads from one module in the Control4® system.
Is triac dimming the same as ELV?
Some common dimming technologies include Forward Phase, Reverse Phase (ELV), and 0-10V. Forward Phase: Forward phase-cut dimming (commonly referred to as incandescent or Triac dimming) is the most common dimming method.
How does Control4 lighting work?
Control4 Keypads feature customizable buttons that allow you to control more than just the lights—including music, movies, locks, thermostats, even your garage door—with a simple press. Turn on or off multiple rooms, or your entire house, with one tap as you’re headed off to work or turning in for the night.
What is Centralised lighting?
Centralized lighting control systems provide switching, dimming, energy management and shade control in a single space or an entire campus, from multiple control locations. • Dim or switch electric lights, control window shades, and measure or monitor system energy use.
Do I need an ELV dimmer?
Standard rotary or basic slider dimmers will do for basic bulbs. Incandescent low voltage systems, like rail systems, have transformers that may require an ELV dimmer to protect the driver. Many states have put bans on standard incandescent bulbs.
Does Control4 use Zigbee or Z-Wave?
Control4 uses the ZigBee protocol in all of our automation solutions. Z-wave: This is a proprietary protocol that communicates using low-power wireless technology.
What is forward phase dimmer?
If you’re going to do forward phase dimming, that means you’re chopping off the forward part of the sine-wave on the “positive current” end, and the back part on the “negative current” end. This kind of dimming is very hard on drivers of an electronic kind because there are surges of current through the circuit.
Is ELV dimmer the same as LED dimmer?
UNDERSTANDING ELV DIMMER TECHNOLOGY LEDs can only handle direct currents (DC), and as a result, using an ELV dimmer with an LED requires some sort of driver. Diverse dimmers will affect LEDs differently. A low-frequency MLV dimmer is going to affect the LED in a way that contrasts with a high-frequency ELV waveform.
Does Control4 support Z-Wave?
At CEDIA 2016, Control4 is announcing that its entire line of EA Series controllers is now Z-Wave Certified via a new plug-in Z-Wave module, including the EA-1 for single room and the EA-3 and EA-5 controllers for whole home entertainment and automation, with supported Z-Wave devices, including sensors and outlet …
Can Alexa control Lutron lighting?
Lutron brings the convenience of smart lighting control to your home while working seamlessly with Alexa to provide control of your Caséta, RA2 Select, or HomeWorks system with your voice. You — or anyone in your family — can tell Alexa to turn lights and fans on, off, or adjust them to your favorite level.