What is K11 for damp proofing?
Description. Sovereign Hey’di K11 is a salt resistant cementitious tanking compound for the protection of structures against water from the ground and which maybe potentially subject to hydrostatic pressure.
Can you use tanking slurry over plaster?
Can NO MORE DAMP Tanking Slurry be plastered over? NO MORE DAMP Renovation plaster can be used directly on top of NO MORE DAMP Tanking Slurry, but to improve adhesion we recommend first applying NO MORE DAMP SBR Latex as a bonding compound.
How do you use a damp proof slurry?
Spray Application: Use wet spray equipment to apply the first and second coats of Sika® Damp Proofing Slurry ensuring the first coat has hardened sufficiently to prevent damage from the second spray application. Smooth second coat using brush or trowel. For all applications apply second coat at 90o to the first coat.
What is sovereign K11?
How do you mix Ka Tanking Slurry?
The recom- mended mixing ratio is approximately 3 partsKA Tanking Slurry to 1 part clean water (by volume). It is recommended that the powder is added slowly to the water and mixed to a smooth, lump free “custard-like” consistency. ‘touch-dry’.
Does Tanking Slurry stop damp?
When the tanking slurry cures, it forms an impermeable waterproof barrier, preventing water ingress and damp. It’s important to point out that unlike a cavity drain system, tanking slurry blocks water from entering your cellar rather than allowing it in and controlling it to an evacuation point.
Can you recoat Tanking Slurry?
Q: Can I paint over KA Tanking Slurry after it dries? A: Yes, you can paint over KA Tanking Slurry after it has dried, but treat it must be treated like new plaster and only a water based emulsion paint should be applied within the first 6 months..
Can you put tanking slurry on damp walls?
Tanking slurry can be used on a damp wall above ground to stop the passage of water. Ideally, you will want to identify and resolve the source of damp before applying it. Below ground, you can use tanking slurry by itself as a form of Type A Waterproofing (barrier system).
Is Tanking Slurry just cement?
Tanking slurry or “cementitious tanking” is a thick liquid coating that is applied to the masonry surface to create a waterproof barrier. It is essentially a type of cement fortified with polymers and other aggregates.
Will Tanking Slurry stop damp?
Tanking slurry is designed to deal with these issues. It is applied directly to damp walls. When the tanking slurry cures, it forms an impermeable waterproof barrier, preventing water ingress and damp.
What is tanking slurry?
How thick should Tanking Slurry be?
Apply a 2mm (. 86 inch) thick coat of tanking slurry to the wall. Dip a paint brush into the mixture and apply the slurry to the wall in long, horizontal strokes. Try to maintain equal coverage until you’ve applied the slurry to the entire wall.
Is Tanking slurry just cement?
How thick should Tanking slurry be?
Can you trowel on tanking slurry?
Tanking slurry can be either brush applied or trowel applied.