What are the parts of a padlock called?
They are comprised of three basic components: the shackle, body and locking mechanism. Shackle: Most often a loop of metal (u-shaped bar) that opens up to lock and unlock the padlock – available in varying lengths and diameters to fit a variety of needs.
What is the U shaped part of a padlock?
The shackle or shank is the U-shaped bar that loops round from, and back into, the padlock body. This is the most exposed part of the padlock and more susceptible to be attacked. Once again, as the overall size of the padlock increases, the larger the shackle can be making it more secure.
What is the receiving part of a lock called?
The latch bore, also known as the edge bore, is the hole drilled from the side of the door into the cross bore to allow the latch of the lock to be installed and to accommodate the sliding of the deadbolt. The diameter of the latch bore is generally 1” to accommodate bolts from either mechanical or electronic locksets.
What is a lock hinge called?
Hasps and Staples. Noun. A hinged clasp used for securing a door, lid, etc. Hasps usually pass over a staple and are fastened by a pin or a padlock. A metal fastening hinge consisting of a strap with a slot that fits over a staple and is secured by a pin, bolt, or padlock.
What is a lock nib?
Has a push in knob or turn nib on one side for locking the door and a safety release function on the other side. These are generally used for internal doors such as toilets or bathrooms, where there is a need for the door to be lockable, but it can be unlocked with requiring a key, normally a screwdriver is required.
What is a Sashlock?
Sash locks, also known as mortice sash locks, use a combined mechanism of a deadbolt, latch and handle mechanism. A sash lock is also one of the most common styles of lever lock used on interior and exterior doors, usually fitted within the material of the door.
How do you unjam a lock?
for a stuck button, try turning the handle while pushing and holding the lock button, and then jiggle the handle to see if it helps. If the door lock is stuck in an unlocked condition, try to see if the door will lock when it is ajar in case of an alignment issue.
How do you force open a padlock?
One of the easiest ways to break a padlock is with a hammer. Start by inserting 2 fingers into the padlock’s shackle loop and pull up on the shackle to create tension. Then, tap the side of the lock that contains the fixed end of the shackle with a hammer using quick, short strikes.