How wide should a valance be?

Most valances should only be 1-1/2 to 5 inches wider than the window if the valance hangs by itself or over a Roman shade. It should be 10 to 30 inches wider than the window if it’s hung over a pair of custom drapes. If the valance is gathered, its total, flat width should be 2 to 3.5 times the width of the window.

Table of Contents

How do you use a table runner as a valance?

Cut the table runner to the width of your window. Then, if you sew, sew a seam. If you don’t sew, do what I did and fold over the edge, securing with no-sew hem tape. Hang onto a curtain or cafe rod using drapery hooks and you’re done-zo.

How to make homemade valances?

Measure the width and length where you will hang the valance. To determine the dimensions of your valance fabric,measure the area where you will hang the valance.

Add 5 inches (13 cm) to the width and 3 inches (7.6 cm) to the length.

Multiple the width by 1.5 if you want a gathered valance (optional).

Choose a fabric for the valance.

How to make your own window valance?

Layout a piece of the MDF and draw a box the length and height of the cornice.

Measure and mark for the returns (sides of the valance). The width of the returns depend upon the window treatments that will be hanging under the cornice.

Use a circular saw to cut out the shape of the cornice,then a jig saw to out the design.

How to make a window valance DIY?

(2) 1″ x 4″ x 10″ pine board (or similar wood)

(1) 1″ x 10″ x (length you want/need your valance) board

(2) large D rings

“L” corner brackets

1/2″ screws

2 yards fo fabric

2 yards of batting

ribbon (0ptional)

heat and bond (optional)

Staple Gun+staples

How to make valances for kitchen windows ideas?

Spring loaded tension rod.

1 yard of fabric (less or more depending on the size of your window and how low you want your curtains to hang)

1 1/2-2 yards each of different types of lace.