How much HP can a 289 make?
The standard 4v 289 was factory rated at 225 hp and the hipo was 271 with torque at 300/310 . In my experience you can knock 50 hp off these figures to give real world installed flywheel figures.
How do I identify a 289 K-code engine?
Factory-installed 289 High Performance engines had the vehicle serial number stamped into the righthand side of the block near the battery’s negative-cable attachment point.
What is a Ford 289 K-code?
The K-Code refers to the Mustangs 289-cubic inch V8 engine. The name was given to the engine due to the K in the fifth position on the car’s chassis number. The 289 K-Code was different due to its upgraded pistons, lifter heads, connecting rods, carburettor and cylinder heads.
How are 289 blocks cleaned?
Every 289 block must pass our magnaflux inspection designed detect any microscopic flaws or cracking. Blocks are then thermal cleaned followed by steel micro blasting until they achieve a brilliant appearance.
How do you close the small block Ford 289 modal?
This modal can be closed by pressing the Escape key or activating the close button. Ask and you shall receive! A 289 small-block Ford was high on the request list for our next Redline Rebuild, and we made it happen.
Is the Ford 289 Xtreme Performance Series 1 a rebuild?
Far from just being rebuilt, the Xtreme Performance series 1 is an OEM replacement that has been fully remanufactured with upgraded parts that have been designed to increase performance, reliability and longevity. Ford 289 4.7 liter Long Block Crate Engine is on sale.
Are there any problems with the Ford 289?
We’re working with a 289 with some fundamental issues stemming from a previous rebuild. (The builder was decidedly sloppy.) Because the cylinders were over bored, with excessive piston-to-cylinder clearances, we’re going to have to take these bores to 4.040 inches, which is as large as you want to go with a small block Ford.