Where is the SIM card in a BlackBerry?
The SIM & microSD tray is located on the top right side of the device. To insert a SIM or microSD card, insert a SIM tool or paperclip into the small hole on the right side of the device to eject the SIM & microSD tray.
How do I eject my SIM card?
Here’s how to remove it:
- Turn off your device.
- Locate your removal tool (a SIM-eject tool or paperclip).
- Insert the removal tool into the small hole next to the SD card tray, and press gently but firmly until the tray pops out.
- Pull the tray out from its slot.
How do you put a SIM card in a BlackBerry 2 KEY?
How to install your SIM and SD Card on the BlackBerry KEY2
- On the left-hand side of your KEY2, poke SIM tool inside the hole.
- Fully remove tray.
- Insert SIM card.
- Insert SD Card if using one.
- Gently insert tray back into KEY2.
How do you put a SIM card in a BlackBerry curve?
Place the back cover on the phone, top first, and press the back cover into place.
- Remove the back cover. Turn the back of the phone towards you.
- Remove the battery. Take hold of the top of the battery and remove it.
- Insert the SIM card. Place the SIM card as illustrated below the SIM card holder.
- Replace the back cover.
How do you open a safety pin on a SIM card slot?
Using a paper clip, thumbtack, or a push pin But make sure you use a paper clip thin enough to fit into the tray’s hole. Apply pressure gently so that the metal doesn’t get all mangled. Alternatively, a thumbtack or a push pin could get the job done, but these are usually too thick to fit into most SIM tray holes.
Are SIM eject tool universal?
For use this SIM eject tool, just insert the straight end of the SIM eject tool into the hole next to the SIM port and remove your SIM card from the tray. Fits all older phone models like iPhones and any other normal or micro SIM card devices.
How do I insert a SIM card into the BlackBerry Classic?
To review this information, in the Classic User Guide refer to the Setup and basics > Setting up your device > Insert the SIM card section by clicking here. A SIM card and SD card tray ejection tool is an in-box accessory for the BlackBerry Classic and is included with the packaged smartphone.
What is a SIM card and SD card tray ejection tool?
A SIM card and SD card tray ejection tool is an in-box accessory for the BlackBerry Classic and is included with the packaged smartphone. Should the ejection tool be lost, a paper clip can be used. Note: Use an object such as a paperclip, which has a flat tip rather than a push pin or other object having a pointed tip.
How do I insert the SIM card into the device?
Ensure the the gold contacts are facing the display and the notch is located in the upper-left, insert the SIM card into the tray as shown. Insert the SIM card tray.