How do you change from C to F on Exergen TemporalScanner?
The factory setting is °F. 2. To change from the °F to the °C mode, press and hold button until the small °F in the upper right of the display changes to °C. A beep will indicate that the setting has been changed, and the TemporalScanner will automatically shut off.
Do you add a degree to a TemporalScanner?
A temporal thermometer will read at about 0.5 to 1 degree lower than an oral thermometer, so you need to add 0.5 to 1 degree to get what your temperature would read orally. For example, if your forehead temperature read as 98.5°F, you could actually have a low-grade fever of 99.5°F or higher.
What is a normal temporal temperature range?
The average body temperature is 98.6 F (37 C). But normal body temperature can range between 97 F (36.1 C) and 99 F (37.2 C) or more. Your body temperature can vary depending on how active you are or the time of day.
Why is my temporal thermometer low?
Low Readings Can be Caused by a Dirty Lens To clean, simply twirl a cotton tipped swab (Q-Tip) dampened in alcohol on the lens, deep in the center of the probe. Preferred site is the temporal artery area. Here, behind the ear could be alternate site, as both are exposed.
What is normal temperature with exergen thermometer?
98.6°F
This calibration allows the hospital to maintain existing protocols for fever workups based on oral temperature, and results in a reading consistent with the 98.6°F (37°C) mean normal oral temperature, in the range of 96.6 – 99.5°F (35.9 – 37.5°C) commonly seen with normal oral temperature measurements.
What is the normal body temp?
The average normal body temperature is generally accepted as 98.6°F (37°C). Some studies have shown that the “normal” body temperature can have a wide range, from 97°F (36.1°C) to 99°F (37.2°C).
How do I know if my exergen thermometer is accurate?
Exergen forehead thermometers need to scan the entire temporal artery from center forehead to ear, with the user holding the scan button down the entire time. Releasing this button too soon can result in an inaccurate and often lower reading.
How to use Exergen temporalscanner?
Remove protective cap before use.
How to use smartglow Exergen temporal scanner?
Soft-Glow Display. Soft lighting for easy reading in any light.
How to use the Exergen temporalscanner home model?
thermometer will immediately begin a new scan each time the button is depressed. Alternate sites when temporal artery or behind ear are unavailable: • Femoral artery: slowly slide the probe across groin. • Lateral thoracic artery: slowly scan side-to-side in the area midway between the axilla and the nipple. More ›.
How do you change Exergen temporal scanner to Fahrenheit?
Push the button to get the thermometer ON.