How much does a top loader transmission weigh?
180 pounds
Toploaders are not as heavy as some automatic transmissions, but still weigh close to 180 pounds (including bellhousing, clutch assembly and shifter) because of their cast-iron housings.
Why is it called a Toploader transmission?
The Toploader got its name from the fact that the access plate to the inner workings was located on the top of the main case, as opposed to side access on most gearboxes it would be compared with, such as the Ford Dagenham or GM’s Saginaw or Muncie.
Who made the Ford Toploader 4 speed?
Tremec
Tremec built the Toploader for Ford and the correct model designation for them is a T-170. These were arguably the strongest 4-speeds made in the ’60s, and the design is still used by NASCAR race teams today. It is also the basis for the Tremec TR-3550 and TKO aftermarket 5-speed manual transmissions.
How much oil does a Ford Toploader take?
approx. 2 quarts
Fill your Toploader with any quality 80W-90 GL-4 gear lubricant until the oil level reaches the fill plug opening. It should take approx. 2 quarts.
What is a Ford Toploader 4 Speed?
“The Top Loader four-speed transmission is a fully synchronized type in all gears, except the reverse sliding idler gear that is in constant mesh. All forward-speed changes are accomplished with synchronizer sleeves, instead of sliding gears.
How do I identify a transmission Toploader?
TOPLOADER I.D. TAG IDENTIFIER
- The Toploader 4-speed transmission is identified by a small metal tag riveted to the right side of the case.
- The first line is the transmission’s ID number. The second line is the serial number.
- The codes listed here are for Ford vehicles.
What is the difference between Muncie M21 and Muncie M22?
The M22 to come later in 1967-’74 is also a close-ratio unit, but much stronger than the M21, with a higher torque capacity. Because the Muncie has so much in common with the T-10 and even similar Saginaw boxes, it is easy to get this guy mixed up with non-Muncie units.
What did Muncie M22 come in?
Can you use GL-5 gear oil instead of GL4?
GL5 and GL4 have similar properties and they have a decent amount of additives to enhance their extreme pressure rating. You can use GL5 instead of GL4, though it does not mean you should. For the best performance of your vehicle’s transmission system, use the recommended oil type.